diff --git a/utils/uncrustify.cfg b/utils/uncrustify.cfg
deleted file mode 100644
index 9caa0d59f5547f3405e5ed978cdc5086b0a784ba..0000000000000000000000000000000000000000
--- a/utils/uncrustify.cfg
+++ /dev/null
@@ -1,2250 +0,0 @@
-# Uncrustify-0.67_f
-
-#
-# General options
-#
-
-# The type of line endings. Default=Auto.
-newlines = auto # auto/lf/crlf/cr
-
-# The original size of tabs in the input. Default=8.
-input_tab_size = 4 # unsigned number
-
-# The size of tabs in the output (only used if align_with_tabs=true). Default=8.
-output_tab_size = 4 # unsigned number
-
-# The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn).
-string_escape_char = 92 # unsigned number
-
-# Alternate string escape char for Pawn. Only works right before the quote char.
-string_escape_char2 = 0 # unsigned number
-
-# Replace tab characters found in string literals with the escape sequence \t instead.
-string_replace_tab_chars = false # false/true
-
-# Allow interpreting '>=' and '>>=' as part of a template in 'void f(list<list<B>>=val);'.
-# If True, 'assert(x<0 && y>=3)' will be broken. Default=False
-# Improvements to template detection may make this option obsolete.
-tok_split_gte = false # false/true
-
-# Override the default ' *INDENT-OFF*' in comments for disabling processing of part of the file.
-disable_processing_cmt = "" # string
-
-# Override the default ' *INDENT-ON*' in comments for enabling processing of part of the file.
-enable_processing_cmt = "" # string
-
-# Enable parsing of digraphs. Default=False.
-enable_digraphs = false # false/true
-
-# Control what to do with the UTF-8 BOM (recommend 'remove').
-utf8_bom = ignore # ignore/add/remove/force
-
-# If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8.
-utf8_byte = false # false/true
-
-# Force the output encoding to UTF-8.
-utf8_force = false # false/true
-
-#
-# Spacing options
-#
-
-# Add or remove space around arithmetic operator '+', '-', '/', '*', etc
-# also '>>>' '<<' '>>' '%' '|'.
-sp_arith = add # ignore/add/remove/force
-
-# Add or remove space around arithmetic operator '+' and '-'. Overrides sp_arith
-sp_arith_additive = ignore # ignore/add/remove/force
-
-# Add or remove space around assignment operator '=', '+=', etc.
-sp_assign = add # ignore/add/remove/force
-
-# Add or remove space around '=' in C++11 lambda capture specifications. Overrides sp_assign.
-sp_cpp_lambda_assign = ignore # ignore/add/remove/force
-
-# Add or remove space after the capture specification in C++11 lambda.
-sp_cpp_lambda_paren = ignore # ignore/add/remove/force
-
-# Add or remove space around assignment operator '=' in a prototype.
-sp_assign_default = add # ignore/add/remove/force
-
-# Add or remove space before assignment operator '=', '+=', etc. Overrides sp_assign.
-sp_before_assign = add # ignore/add/remove/force
-
-# Add or remove space after assignment operator '=', '+=', etc. Overrides sp_assign.
-sp_after_assign = add # ignore/add/remove/force
-
-# Add or remove space in 'NS_ENUM ('.
-sp_enum_paren = ignore # ignore/add/remove/force
-
-# Add or remove space around assignment '=' in enum.
-sp_enum_assign = add # ignore/add/remove/force
-
-# Add or remove space before assignment '=' in enum. Overrides sp_enum_assign.
-sp_enum_before_assign = add # ignore/add/remove/force
-
-# Add or remove space after assignment '=' in enum. Overrides sp_enum_assign.
-sp_enum_after_assign = add # ignore/add/remove/force
-
-# Add or remove space around assignment ':' in enum.
-sp_enum_colon = ignore # ignore/add/remove/force
-
-# Add or remove space around preprocessor '##' concatenation operator. Default=Add.
-sp_pp_concat = ignore # ignore/add/remove/force
-
-# Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator.
-sp_pp_stringify = ignore # ignore/add/remove/force
-
-# Add or remove space before preprocessor '#' stringify operator as in '#define x(y) L#y'.
-sp_before_pp_stringify = ignore # ignore/add/remove/force
-
-# Add or remove space around boolean operators '&&' and '||'.
-sp_bool = add # ignore/add/remove/force
-
-# Add or remove space around compare operator '<', '>', '==', etc.
-sp_compare = add # ignore/add/remove/force
-
-# Add or remove space inside '(' and ')'.
-sp_inside_paren = remove # ignore/add/remove/force
-
-# Add or remove space between nested parens: '((' vs ') )'.
-sp_paren_paren = ignore # ignore/add/remove/force
-
-# Add or remove space between back-to-back parens: ')(' vs ') ('.
-sp_cparen_oparen = ignore # ignore/add/remove/force
-
-# Whether to balance spaces inside nested parens.
-sp_balance_nested_parens = false # false/true
-
-# Add or remove space between ')' and '{'.
-sp_paren_brace = add # ignore/add/remove/force
-
-# Add or remove space before pointer star '*'.
-sp_before_ptr_star = add # ignore/add/remove/force
-
-# Add or remove space before pointer star '*' that isn't followed by a variable name
-# If set to 'ignore', sp_before_ptr_star is used instead.
-sp_before_unnamed_ptr_star = add # ignore/add/remove/force
-
-# Add or remove space between pointer stars '*'.
-sp_between_ptr_star = remove # ignore/add/remove/force
-
-# Add or remove space after pointer star '*', if followed by a word.
-sp_after_ptr_star = remove # ignore/add/remove/force
-
-# Add or remove space after pointer caret '^', if followed by a word.
-sp_after_ptr_block_caret = ignore # ignore/add/remove/force
-
-# Add or remove space after pointer star '*', if followed by a qualifier.
-sp_after_ptr_star_qualifier = ignore # ignore/add/remove/force
-
-# Add or remove space after a pointer star '*', if followed by a func proto/def.
-sp_after_ptr_star_func = remove # ignore/add/remove/force
-
-# Add or remove space after a pointer star '*', if followed by an open paren (function types).
-sp_ptr_star_paren = ignore # ignore/add/remove/force
-
-# Add or remove space before a pointer star '*', if followed by a func proto/def.
-sp_before_ptr_star_func = add # ignore/add/remove/force
-
-# Add or remove space before a reference sign '&'.
-sp_before_byref = ignore # ignore/add/remove/force
-
-# Add or remove space before a reference sign '&' that isn't followed by a variable name.
-# If set to 'ignore', sp_before_byref is used instead.
-sp_before_unnamed_byref = ignore # ignore/add/remove/force
-
-# Add or remove space after reference sign '&', if followed by a word.
-sp_after_byref = ignore # ignore/add/remove/force
-
-# Add or remove space after a reference sign '&', if followed by a func proto/def.
-sp_after_byref_func = ignore # ignore/add/remove/force
-
-# Add or remove space before a reference sign '&', if followed by a func proto/def.
-sp_before_byref_func = ignore # ignore/add/remove/force
-
-# Add or remove space between type and word. Default=Force.
-sp_after_type = force # ignore/add/remove/force
-
-# Add or remove space before the paren in the D constructs 'template Foo(' and 'class Foo('.
-sp_before_template_paren = ignore # ignore/add/remove/force
-
-# Add or remove space in 'template <' vs 'template<'.
-# If set to ignore, sp_before_angle is used.
-sp_template_angle = ignore # ignore/add/remove/force
-
-# Add or remove space before '<>'.
-sp_before_angle = ignore # ignore/add/remove/force
-
-# Add or remove space inside '<' and '>'.
-sp_inside_angle = ignore # ignore/add/remove/force
-
-# Add or remove space between '<>' and ':'.
-sp_angle_colon = ignore # ignore/add/remove/force
-
-# Add or remove space after '<>'.
-sp_after_angle = ignore # ignore/add/remove/force
-
-# Add or remove space between '<>' and '(' as found in 'new List<byte>(foo);'.
-sp_angle_paren = ignore # ignore/add/remove/force
-
-# Add or remove space between '<>' and '()' as found in 'new List<byte>();'.
-sp_angle_paren_empty = ignore # ignore/add/remove/force
-
-# Add or remove space between '<>' and a word as in 'List<byte> m;' or 'template <typename T> static ...'.
-sp_angle_word = ignore # ignore/add/remove/force
-
-# Add or remove space between '>' and '>' in '>>' (template stuff). Default=Add.
-sp_angle_shift = add # ignore/add/remove/force
-
-# Permit removal of the space between '>>' in 'foo<bar<int> >' (C++11 only). Default=False.
-# sp_angle_shift cannot remove the space without this option.
-sp_permit_cpp11_shift = false # false/true
-
-# Add or remove space before '(' of 'if', 'for', 'switch', 'while', etc.
-sp_before_sparen = add # ignore/add/remove/force
-
-# Add or remove space inside if-condition '(' and ')'.
-sp_inside_sparen = remove # ignore/add/remove/force
-
-# Add or remove space before if-condition ')'. Overrides sp_inside_sparen.
-sp_inside_sparen_close = ignore # ignore/add/remove/force
-
-# Add or remove space after if-condition '('. Overrides sp_inside_sparen.
-sp_inside_sparen_open = ignore # ignore/add/remove/force
-
-# Add or remove space after ')' of 'if', 'for', 'switch', and 'while', etc.
-sp_after_sparen = add # ignore/add/remove/force
-
-# Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while', etc.
-sp_sparen_brace = add # ignore/add/remove/force
-
-# Add or remove space between 'invariant' and '(' in the D language.
-sp_invariant_paren = ignore # ignore/add/remove/force
-
-# Add or remove space after the ')' in 'invariant (C) c' in the D language.
-sp_after_invariant_paren = ignore # ignore/add/remove/force
-
-# Add or remove space before empty statement ';' on 'if', 'for' and 'while'.
-sp_special_semi = ignore # ignore/add/remove/force
-
-# Add or remove space before ';'. Default=Remove.
-sp_before_semi = remove # ignore/add/remove/force
-
-# Add or remove space before ';' in non-empty 'for' statements.
-sp_before_semi_for = ignore # ignore/add/remove/force
-
-# Add or remove space before a semicolon of an empty part of a for statement.
-sp_before_semi_for_empty = ignore # ignore/add/remove/force
-
-# Add or remove space after ';', except when followed by a comment. Default=Add.
-sp_after_semi = add # ignore/add/remove/force
-
-# Add or remove space after ';' in non-empty 'for' statements. Default=Force.
-sp_after_semi_for = force # ignore/add/remove/force
-
-# Add or remove space after the final semicolon of an empty part of a for statement: for ( ; ; <here> ).
-sp_after_semi_for_empty = ignore # ignore/add/remove/force
-
-# Add or remove space before '[' (except '[]').
-sp_before_square = remove # ignore/add/remove/force
-
-# Add or remove space before '[]'.
-sp_before_squares = remove # ignore/add/remove/force
-
-# Add or remove space before structured bindings. Only for C++17.
-sp_cpp_before_struct_binding = ignore # ignore/add/remove/force
-
-# Add or remove space inside a non-empty '[' and ']'.
-sp_inside_square = remove # ignore/add/remove/force
-
-# Add or remove space inside a non-empty OC boxed array '@[' and ']'.
-# If set to ignore, sp_inside_square is used.
-sp_inside_square_oc_array = ignore # ignore/add/remove/force
-
-# Add or remove space after ',', 'a,b' vs 'a, b'.
-sp_after_comma = add # ignore/add/remove/force
-
-# Add or remove space before ','. Default=Remove.
-sp_before_comma = remove # ignore/add/remove/force
-
-# Add or remove space between ',' and ']' in multidimensional array type 'int[,,]'. Only for C#.
-sp_after_mdatype_commas = ignore # ignore/add/remove/force
-
-# Add or remove space between '[' and ',' in multidimensional array type 'int[,,]'. Only for C#.
-sp_before_mdatype_commas = ignore # ignore/add/remove/force
-
-# Add or remove space between ',' in multidimensional array type 'int[,,]'. Only for C#.
-sp_between_mdatype_commas = ignore # ignore/add/remove/force
-
-# Add or remove space between an open paren and comma: '(,' vs '( ,'. Default=Force.
-sp_paren_comma = force # ignore/add/remove/force
-
-# Add or remove space before the variadic '...' when preceded by a non-punctuator.
-sp_before_ellipsis = ignore # ignore/add/remove/force
-
-# Add or remove space after class ':'.
-sp_after_class_colon = ignore # ignore/add/remove/force
-
-# Add or remove space before class ':'.
-sp_before_class_colon = ignore # ignore/add/remove/force
-
-# Add or remove space after class constructor ':'.
-sp_after_constr_colon = ignore # ignore/add/remove/force
-
-# Add or remove space before class constructor ':'.
-sp_before_constr_colon = ignore # ignore/add/remove/force
-
-# Add or remove space before case ':'. Default=Remove.
-sp_before_case_colon = remove # ignore/add/remove/force
-
-# Add or remove space between 'operator' and operator sign.
-sp_after_operator = ignore # ignore/add/remove/force
-
-# Add or remove space between the operator symbol and the open paren, as in 'operator ++('.
-sp_after_operator_sym = ignore # ignore/add/remove/force
-
-# Overrides sp_after_operator_sym when the operator has no arguments, as in 'operator *()'.
-sp_after_operator_sym_empty = ignore # ignore/add/remove/force
-
-# Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a'.
-sp_after_cast = remove # ignore/add/remove/force
-
-# Add or remove spaces inside cast parens.
-sp_inside_paren_cast = remove # ignore/add/remove/force
-
-# Add or remove space between the type and open paren in a C++ cast, i.e. 'int(exp)' vs 'int (exp)'.
-sp_cpp_cast_paren = remove # ignore/add/remove/force
-
-# Add or remove space between 'sizeof' and '('.
-sp_sizeof_paren = remove # ignore/add/remove/force
-
-# Add or remove space after the tag keyword (Pawn).
-sp_after_tag = ignore # ignore/add/remove/force
-
-# Add or remove space inside enum '{' and '}'.
-sp_inside_braces_enum = ignore # ignore/add/remove/force
-
-# Add or remove space inside struct/union '{' and '}'.
-sp_inside_braces_struct = ignore # ignore/add/remove/force
-
-# Add or remove space inside OC boxed dictionary @'{' and '}'
-sp_inside_braces_oc_dict = ignore # ignore/add/remove/force
-
-# Add or remove space after open brace in an unnamed temporary direct-list-initialization.
-sp_after_type_brace_init_lst_open = ignore # ignore/add/remove/force
-
-# Add or remove space before close brace in an unnamed temporary direct-list-initialization.
-sp_before_type_brace_init_lst_close = ignore # ignore/add/remove/force
-
-# Add or remove space inside an unnamed temporary direct-list-initialization.
-sp_inside_type_brace_init_lst = ignore # ignore/add/remove/force
-
-# Add or remove space inside '{' and '}'.
-sp_inside_braces = ignore # ignore/add/remove/force
-
-# Add or remove space inside '{}'.
-sp_inside_braces_empty = ignore # ignore/add/remove/force
-
-# Add or remove space between return type and function name
-# A minimum of 1 is forced except for pointer return types.
-sp_type_func = ignore # ignore/add/remove/force
-
-# Add or remove space between type and open brace of an unnamed temporary direct-list-initialization.
-sp_type_brace_init_lst = ignore # ignore/add/remove/force
-
-# Add or remove space between function name and '(' on function declaration.
-sp_func_proto_paren = remove # ignore/add/remove/force
-
-# Add or remove space between function name and '()' on function declaration without parameters.
-sp_func_proto_paren_empty = ignore # ignore/add/remove/force
-
-# Add or remove space between function name and '(' on function definition.
-sp_func_def_paren = remove # ignore/add/remove/force
-
-# Add or remove space between function name and '()' on function definition without parameters.
-sp_func_def_paren_empty = ignore # ignore/add/remove/force
-
-# Add or remove space inside empty function '()'.
-sp_inside_fparens = ignore # ignore/add/remove/force
-
-# Add or remove space inside function '(' and ')'.
-sp_inside_fparen = remove # ignore/add/remove/force
-
-# Add or remove space inside the first parens in the function type: 'void (*x)(...)'.
-sp_inside_tparen = ignore # ignore/add/remove/force
-
-# Add or remove between the parens in the function type: 'void (*x)(...)'.
-sp_after_tparen_close = ignore # ignore/add/remove/force
-
-# Add or remove space between ']' and '(' when part of a function call.
-sp_square_fparen = ignore # ignore/add/remove/force
-
-# Add or remove space between ')' and '{' of function.
-sp_fparen_brace = ignore # ignore/add/remove/force
-
-# Add or remove space between ')' and '{' of function call in object initialization. Overrides sp_fparen_brace.
-sp_fparen_brace_initializer = ignore # ignore/add/remove/force
-
-# Java: Add or remove space between ')' and '{{' of double brace initializer.
-sp_fparen_dbrace = ignore # ignore/add/remove/force
-
-# Add or remove space between function name and '(' on function calls.
-sp_func_call_paren = remove # ignore/add/remove/force
-
-# Add or remove space between function name and '()' on function calls without parameters.
-# If set to 'ignore' (the default), sp_func_call_paren is used.
-sp_func_call_paren_empty = ignore # ignore/add/remove/force
-
-# Add or remove space between the user function name and '(' on function calls
-# You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.
-sp_func_call_user_paren = ignore # ignore/add/remove/force
-
-# Add or remove space inside user function '(' and ')'
-# You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.
-sp_func_call_user_inside_fparen = ignore # ignore/add/remove/force
-
-# Add or remove space between nested parens with user functions: '((' vs ') )'You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.
-sp_func_call_user_paren_paren = remove # ignore/add/remove/force
-
-# Add or remove space between a constructor/destructor and the open paren.
-sp_func_class_paren = ignore # ignore/add/remove/force
-
-# Add or remove space between a constructor without parameters or destructor and '()'.
-sp_func_class_paren_empty = ignore # ignore/add/remove/force
-
-# Add or remove space between 'return' and '('.
-sp_return_paren = ignore # ignore/add/remove/force
-
-# Add or remove space between '__attribute__' and '('.
-sp_attribute_paren = ignore # ignore/add/remove/force
-
-# Add or remove space between 'defined' and '(' in '#if defined (FOO)'.
-sp_defined_paren = remove # ignore/add/remove/force
-
-# Add or remove space between 'throw' and '(' in 'throw (something)'.
-sp_throw_paren = ignore # ignore/add/remove/force
-
-# Add or remove space between 'throw' and anything other than '(' as in '@throw [...];'.
-sp_after_throw = ignore # ignore/add/remove/force
-
-# Add or remove space between 'catch' and '(' in 'catch (something) { }'
-# If set to ignore, sp_before_sparen is used.
-sp_catch_paren = ignore # ignore/add/remove/force
-
-# Add or remove space between '@catch' and '(' in '@catch (something) { }'
-# If set to ignore, sp_catch_paren is used.
-sp_oc_catch_paren = ignore # ignore/add/remove/force
-
-# Add or remove space between 'version' and '(' in 'version (something) { }' (D language)
-# If set to ignore, sp_before_sparen is used.
-sp_version_paren = ignore # ignore/add/remove/force
-
-# Add or remove space between 'scope' and '(' in 'scope (something) { }' (D language)
-# If set to ignore, sp_before_sparen is used.
-sp_scope_paren = ignore # ignore/add/remove/force
-
-# Add or remove space between 'super' and '(' in 'super (something)'. Default=Remove.
-sp_super_paren = remove # ignore/add/remove/force
-
-# Add or remove space between 'this' and '(' in 'this (something)'. Default=Remove.
-sp_this_paren = remove # ignore/add/remove/force
-
-# Add or remove space between macro and value.
-sp_macro = ignore # ignore/add/remove/force
-
-# Add or remove space between macro function ')' and value.
-sp_macro_func = ignore # ignore/add/remove/force
-
-# Add or remove space between 'else' and '{' if on the same line.
-sp_else_brace = add # ignore/add/remove/force
-
-# Add or remove space between '}' and 'else' if on the same line.
-sp_brace_else = ignore # ignore/add/remove/force
-
-# Add or remove space between '}' and the name of a typedef on the same line.
-sp_brace_typedef = ignore # ignore/add/remove/force
-
-# Add or remove space between 'catch' and '{' if on the same line.
-sp_catch_brace = ignore # ignore/add/remove/force
-
-# Add or remove space between '@catch' and '{' if on the same line.
-# If set to ignore, sp_catch_brace is used.
-sp_oc_catch_brace = ignore # ignore/add/remove/force
-
-# Add or remove space between '}' and 'catch' if on the same line.
-sp_brace_catch = ignore # ignore/add/remove/force
-
-# Add or remove space between '}' and '@catch' if on the same line.
-# If set to ignore, sp_brace_catch is used.
-sp_oc_brace_catch = ignore # ignore/add/remove/force
-
-# Add or remove space between 'finally' and '{' if on the same line.
-sp_finally_brace = ignore # ignore/add/remove/force
-
-# Add or remove space between '}' and 'finally' if on the same line.
-sp_brace_finally = ignore # ignore/add/remove/force
-
-# Add or remove space between 'try' and '{' if on the same line.
-sp_try_brace = ignore # ignore/add/remove/force
-
-# Add or remove space between get/set and '{' if on the same line.
-sp_getset_brace = ignore # ignore/add/remove/force
-
-# Add or remove space between a variable and '{' for C++ uniform initialization. Default=Add.
-sp_word_brace = add # ignore/add/remove/force
-
-# Add or remove space between a variable and '{' for a namespace. Default=Add.
-sp_word_brace_ns = add # ignore/add/remove/force
-
-# Add or remove space before the '::' operator.
-sp_before_dc = ignore # ignore/add/remove/force
-
-# Add or remove space after the '::' operator.
-sp_after_dc = ignore # ignore/add/remove/force
-
-# Add or remove around the D named array initializer ':' operator.
-sp_d_array_colon = ignore # ignore/add/remove/force
-
-# Add or remove space after the '!' (not) operator. Default=Remove.
-sp_not = remove # ignore/add/remove/force
-
-# Add or remove space after the '~' (invert) operator. Default=Remove.
-sp_inv = remove # ignore/add/remove/force
-
-# Add or remove space after the '&' (address-of) operator. Default=Remove
-# This does not affect the spacing after a '&' that is part of a type.
-sp_addr = remove # ignore/add/remove/force
-
-# Add or remove space around the '.' or '->' operators. Default=Remove.
-sp_member = remove # ignore/add/remove/force
-
-# Add or remove space after the '*' (dereference) operator. Default=Remove
-# This does not affect the spacing after a '*' that is part of a type.
-sp_deref = remove # ignore/add/remove/force
-
-# Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove.
-sp_sign = remove # ignore/add/remove/force
-
-# Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove.
-sp_incdec = remove # ignore/add/remove/force
-
-# Add or remove space before a backslash-newline at the end of a line. Default=Add.
-sp_before_nl_cont = add # ignore/add/remove/force
-
-# Add or remove space after the scope '+' or '-', as in '-(void) foo;' or '+(int) bar;'.
-sp_after_oc_scope = ignore # ignore/add/remove/force
-
-# Add or remove space after the colon in message specs
-# '-(int) f:(int) x;' vs '-(int) f: (int) x;'.
-sp_after_oc_colon = ignore # ignore/add/remove/force
-
-# Add or remove space before the colon in message specs
-# '-(int) f: (int) x;' vs '-(int) f : (int) x;'.
-sp_before_oc_colon = ignore # ignore/add/remove/force
-
-# Add or remove space after the colon in immutable dictionary expression
-# 'NSDictionary *test = @{@"foo" :@"bar"};'.
-sp_after_oc_dict_colon = ignore # ignore/add/remove/force
-
-# Add or remove space before the colon in immutable dictionary expression
-# 'NSDictionary *test = @{@"foo" :@"bar"};'.
-sp_before_oc_dict_colon = ignore # ignore/add/remove/force
-
-# Add or remove space after the colon in message specs
-# '[object setValue:1];' vs '[object setValue: 1];'.
-sp_after_send_oc_colon = ignore # ignore/add/remove/force
-
-# Add or remove space before the colon in message specs
-# '[object setValue:1];' vs '[object setValue :1];'.
-sp_before_send_oc_colon = ignore # ignore/add/remove/force
-
-# Add or remove space after the (type) in message specs
-# '-(int)f: (int) x;' vs '-(int)f: (int)x;'.
-sp_after_oc_type = ignore # ignore/add/remove/force
-
-# Add or remove space after the first (type) in message specs
-# '-(int) f:(int)x;' vs '-(int)f:(int)x;'.
-sp_after_oc_return_type = ignore # ignore/add/remove/force
-
-# Add or remove space between '@selector' and '('
-# '@selector(msgName)' vs '@selector (msgName)'
-# Also applies to @protocol() constructs.
-sp_after_oc_at_sel = ignore # ignore/add/remove/force
-
-# Add or remove space between '@selector(x)' and the following word
-# '@selector(foo) a:' vs '@selector(foo)a:'.
-sp_after_oc_at_sel_parens = ignore # ignore/add/remove/force
-
-# Add or remove space inside '@selector' parens
-# '@selector(foo)' vs '@selector( foo )'
-# Also applies to @protocol() constructs.
-sp_inside_oc_at_sel_parens = ignore # ignore/add/remove/force
-
-# Add or remove space before a block pointer caret
-# '^int (int arg){...}' vs. ' ^int (int arg){...}'.
-sp_before_oc_block_caret = ignore # ignore/add/remove/force
-
-# Add or remove space after a block pointer caret
-# '^int (int arg){...}' vs. '^ int (int arg){...}'.
-sp_after_oc_block_caret = ignore # ignore/add/remove/force
-
-# Add or remove space between the receiver and selector in a message.
-# '[receiver selector ...]'.
-sp_after_oc_msg_receiver = ignore # ignore/add/remove/force
-
-# Add or remove space after @property.
-sp_after_oc_property = ignore # ignore/add/remove/force
-
-# Add or remove space between '@synchronized' and the parenthesis
-# '@synchronized(foo)' vs '@synchronized (foo)'.
-sp_after_oc_synchronized = remove # ignore/add/remove/force
-
-# Add or remove space around the ':' in 'b ? t : f'.
-sp_cond_colon = ignore # ignore/add/remove/force
-
-# Add or remove space before the ':' in 'b ? t : f'. Overrides sp_cond_colon.
-sp_cond_colon_before = ignore # ignore/add/remove/force
-
-# Add or remove space after the ':' in 'b ? t : f'. Overrides sp_cond_colon.
-sp_cond_colon_after = ignore # ignore/add/remove/force
-
-# Add or remove space around the '?' in 'b ? t : f'.
-sp_cond_question = ignore # ignore/add/remove/force
-
-# Add or remove space before the '?' in 'b ? t : f'. Overrides sp_cond_question.
-sp_cond_question_before = ignore # ignore/add/remove/force
-
-# Add or remove space after the '?' in 'b ? t : f'. Overrides sp_cond_question.
-sp_cond_question_after = ignore # ignore/add/remove/force
-
-# In the abbreviated ternary form (a ?: b), add/remove space between ? and :.'. Overrides all other sp_cond_* options.
-sp_cond_ternary_short = ignore # ignore/add/remove/force
-
-# Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here.
-sp_case_label = ignore # ignore/add/remove/force
-
-# Control the space around the D '..' operator.
-sp_range = ignore # ignore/add/remove/force
-
-# Control the spacing after ':' in 'for (TYPE VAR : EXPR)'. Only JAVA.
-sp_after_for_colon = ignore # ignore/add/remove/force
-
-# Control the spacing before ':' in 'for (TYPE VAR : EXPR)'. Only JAVA.
-sp_before_for_colon = ignore # ignore/add/remove/force
-
-# Control the spacing in 'extern (C)' (D).
-sp_extern_paren = ignore # ignore/add/remove/force
-
-# Control the space after the opening of a C++ comment '// A' vs '//A'.
-sp_cmt_cpp_start = ignore # ignore/add/remove/force
-
-# True: If space is added with sp_cmt_cpp_start, do it after doxygen sequences like '///', '///<', '//!' and '//!<'.
-sp_cmt_cpp_doxygen = false # false/true
-
-# True: If space is added with sp_cmt_cpp_start, do it after Qt translator or meta-data comments like '//:', '//=', and '//~'.
-sp_cmt_cpp_qttr = false # false/true
-
-# Controls the spaces between #else or #endif and a trailing comment.
-sp_endif_cmt = ignore # ignore/add/remove/force
-
-# Controls the spaces after 'new', 'delete' and 'delete[]'.
-sp_after_new = ignore # ignore/add/remove/force
-
-# Controls the spaces between new and '(' in 'new()'.
-sp_between_new_paren = ignore # ignore/add/remove/force
-
-# Controls the spaces between ')' and 'type' in 'new(foo) BAR'.
-sp_after_newop_paren = ignore # ignore/add/remove/force
-
-# Controls the spaces inside paren of the new operator: 'new(foo) BAR'.
-sp_inside_newop_paren = ignore # ignore/add/remove/force
-
-# Controls the space after open paren of the new operator: 'new(foo) BAR'.
-# Overrides sp_inside_newop_paren.
-sp_inside_newop_paren_open = ignore # ignore/add/remove/force
-
-# Controls the space before close paren of the new operator: 'new(foo) BAR'.
-# Overrides sp_inside_newop_paren.
-sp_inside_newop_paren_close = ignore # ignore/add/remove/force
-
-# Controls the spaces before a trailing or embedded comment.
-sp_before_tr_emb_cmt = ignore # ignore/add/remove/force
-
-# Number of spaces before a trailing or embedded comment.
-sp_num_before_tr_emb_cmt = 0 # unsigned number
-
-# Control space between a Java annotation and the open paren.
-sp_annotation_paren = ignore # ignore/add/remove/force
-
-# If True, vbrace tokens are dropped to the previous token and skipped.
-sp_skip_vbrace_tokens = false # false/true
-
-# Controls the space after 'noexcept'.
-sp_after_noexcept = ignore # ignore/add/remove/force
-
-# If True, a <TAB> is inserted after #define.
-force_tab_after_define = false # false/true
-
-#
-# Indenting
-#
-
-# The number of columns to indent per level.
-# Usually 2, 3, 4, or 8. Default=8.
-indent_columns = 4 # unsigned number
-
-# The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents.
-# For FreeBSD, this is set to 4. Negative value is absolute and not increased for each '(' level.
-indent_continue = 0 # number
-
-# Indent empty lines - lines which contain only spaces before newline character
-indent_single_newlines = false # false/true
-
-# The continuation indent for func_*_param if they are true.
-# If non-zero, this overrides the indent.
-indent_param = 0 # unsigned number
-
-# How to use tabs when indenting code
-# 0=spaces only
-# 1=indent with tabs to brace level, align with spaces (default)
-# 2=indent and align with tabs, using spaces when not on a tabstop
-indent_with_tabs = 1 # unsigned number
-
-# Comments that are not a brace level are indented with tabs on a tabstop.
-# Requires indent_with_tabs=2. If false, will use spaces.
-indent_cmt_with_tabs = false # false/true
-
-# Whether to indent strings broken by '\' so that they line up.
-indent_align_string = false # false/true
-
-# The number of spaces to indent multi-line XML strings.
-# Requires indent_align_string=True.
-indent_xml_string = 0 # unsigned number
-
-# Spaces to indent '{' from level.
-indent_brace = 0 # unsigned number
-
-# Whether braces are indented to the body level.
-indent_braces = false # false/true
-
-# Disabled indenting function braces if indent_braces is True.
-indent_braces_no_func = false # false/true
-
-# Disabled indenting class braces if indent_braces is True.
-indent_braces_no_class = false # false/true
-
-# Disabled indenting struct braces if indent_braces is True.
-indent_braces_no_struct = false # false/true
-
-# Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc.
-indent_brace_parent = false # false/true
-
-# Indent based on the paren open instead of the brace open in '({\n', default is to indent by brace.
-indent_paren_open_brace = false # false/true
-
-# indent a C# delegate by another level, default is to not indent by another level.
-indent_cs_delegate_brace = false # false/true
-
-# indent a C# delegate(To hanndle delegates with no brace) by another level. default: false
-indent_cs_delegate_body = false # false/true
-
-# Whether the 'namespace' body is indented.
-indent_namespace = false # false/true
-
-# Only indent one namespace and no sub-namespaces.
-# Requires indent_namespace=True.
-indent_namespace_single_indent = false # false/true
-
-# The number of spaces to indent a namespace block.
-indent_namespace_level = 0 # unsigned number
-
-# If the body of the namespace is longer than this number, it won't be indented.
-# Requires indent_namespace=True. Default=0 (no limit)
-indent_namespace_limit = 0 # unsigned number
-
-# Whether the 'extern "C"' body is indented.
-indent_extern = false # false/true
-
-# Whether the 'class' body is indented.
-indent_class = true # false/true
-
-# Whether to indent the stuff after a leading base class colon.
-indent_class_colon = false # false/true
-
-# Indent based on a class colon instead of the stuff after the colon.
-# Requires indent_class_colon=True. Default=False.
-indent_class_on_colon = false # false/true
-
-# Whether to indent the stuff after a leading class initializer colon.
-indent_constr_colon = false # false/true
-
-# Virtual indent from the ':' for member initializers. Default=2.
-indent_ctor_init_leading = 2 # unsigned number
-
-# Additional indent for constructor initializer list.
-# Negative values decrease indent down to the first column. Default=0.
-indent_ctor_init = 0 # number
-
-# False=treat 'else\nif' as 'else if' for indenting purposes
-# True=indent the 'if' one level.
-indent_else_if = false # false/true
-
-# Amount to indent variable declarations after a open brace. neg=relative, pos=absolute.
-indent_var_def_blk = 0 # number
-
-# Indent continued variable declarations instead of aligning.
-indent_var_def_cont = false # false/true
-
-# Indent continued shift expressions ('<<' and '>>') instead of aligning.
-# Turn align_left_shift off when enabling this.
-indent_shift = false # false/true
-
-# True: force indentation of function definition to start in column 1
-# False: use the default behavior.
-indent_func_def_force_col1 = false # false/true
-
-# True: indent continued function call parameters one indent level
-# False: align parameters under the open paren.
-indent_func_call_param = false # false/true
-
-# Same as indent_func_call_param, but for function defs.
-indent_func_def_param = false # false/true
-
-# Same as indent_func_call_param, but for function protos.
-indent_func_proto_param = false # false/true
-
-# Same as indent_func_call_param, but for class declarations.
-indent_func_class_param = false # false/true
-
-# Same as indent_func_call_param, but for class variable constructors.
-indent_func_ctor_var_param = false # false/true
-
-# Same as indent_func_call_param, but for templates.
-indent_template_param = false # false/true
-
-# Double the indent for indent_func_xxx_param options.
-# Use both values of the options indent_columns and indent_param.
-indent_func_param_double = true # false/true
-
-# Indentation column for standalone 'const' function decl/proto qualifier.
-indent_func_const = 0 # unsigned number
-
-# Indentation column for standalone 'throw' function decl/proto qualifier.
-indent_func_throw = 0 # unsigned number
-
-# The number of spaces to indent a continued '->' or '.'
-# Usually set to 0, 1, or indent_columns.
-indent_member = 0 # unsigned number
-
-# setting to true will indent lines broken at '.' or '->' by a single indent
-# UO_indent_member option will not be effective if this is set to true.
-indent_member_single = false # false/true
-
-# Spaces to indent single line ('//') comments on lines before code.
-indent_sing_line_comments = 0 # unsigned number
-
-# If set, will indent trailing single line ('//') comments relative
-# to the code instead of trying to keep the same absolute column.
-indent_relative_single_line_comments = false # false/true
-
-# Spaces to indent 'case' from 'switch'
-# Usually 0 or indent_columns.
-indent_switch_case = 4 # unsigned number
-
-# Whether to indent preprocessor statements inside of switch statements.
-indent_switch_pp = true # false/true
-
-# Spaces to shift the 'case' line, without affecting any other lines
-# Usually 0.
-indent_case_shift = 0 # unsigned number
-
-# Spaces to indent '{' from 'case'.
-# By default, the brace will appear under the 'c' in case.
-# Usually set to 0 or indent_columns.
-# negative value are OK.
-indent_case_brace = 0 # number
-
-# Whether to indent comments found in first column.
-indent_col1_comment = false # false/true
-
-# How to indent goto labels
-# >0: absolute column where 1 is the leftmost column
-# <=0: subtract from brace indent
-# Default=1
-indent_label = 1 # number
-
-# Same as indent_label, but for access specifiers that are followed by a colon. Default=1
-indent_access_spec = 1 # number
-
-# Indent the code after an access specifier by one level.
-# If set, this option forces 'indent_access_spec=0'.
-indent_access_spec_body = false # false/true
-
-# If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended).
-indent_paren_nl = false # false/true
-
-# Controls the indent of a close paren after a newline.
-# 0: Indent to body level
-# 1: Align under the open paren
-# 2: Indent to the brace level
-indent_paren_close = 0 # unsigned number
-
-# Controls the indent of the open paren of a function definition, if on it's own line.If True, indents the open paren
-indent_paren_after_func_def = false # false/true
-
-# Controls the indent of the open paren of a function declaration, if on it's own line.If True, indents the open paren
-indent_paren_after_func_decl = false # false/true
-
-# Controls the indent of the open paren of a function call, if on it's own line.If True, indents the open paren
-indent_paren_after_func_call = false # false/true
-
-# Controls the indent of a comma when inside a paren.If True, aligns under the open paren.
-indent_comma_paren = false # false/true
-
-# Controls the indent of a BOOL operator when inside a paren.If True, aligns under the open paren.
-indent_bool_paren = false # false/true
-
-# Controls the indent of a semicolon when inside a for paren.If True, aligns under the open for paren.
-indent_semicolon_for_paren = false # false/true
-
-# If 'indent_bool_paren' is True, controls the indent of the first expression. If True, aligns the first expression to the following ones.
-indent_first_bool_expr = false # false/true
-
-# If 'indent_semicolon_for_paren' is True, controls the indent of the first expression. If True, aligns the first expression to the following ones.
-indent_first_for_expr = false # false/true
-
-# If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended).
-indent_square_nl = false # false/true
-
-# Don't change the relative indent of ESQL/C 'EXEC SQL' bodies.
-indent_preserve_sql = false # false/true
-
-# Align continued statements at the '='. Default=True
-# If False or the '=' is followed by a newline, the next line is indent one tab.
-indent_align_assign = true # false/true
-
-# Align continued statements at the '('. Default=True
-# If FALSE or the '(' is not followed by a newline, the next line indent is one tab.
-indent_align_paren = true # false/true
-
-# Indent OC blocks at brace level instead of usual rules.
-indent_oc_block = false # false/true
-
-# Indent OC blocks in a message relative to the parameter name.
-# 0=use indent_oc_block rules, 1+=spaces to indent
-indent_oc_block_msg = 0 # unsigned number
-
-# Minimum indent for subsequent parameters
-indent_oc_msg_colon = 0 # unsigned number
-
-# If True, prioritize aligning with initial colon (and stripping spaces from lines, if necessary).
-# Default=True.
-indent_oc_msg_prioritize_first_colon = true # false/true
-
-# If indent_oc_block_msg and this option are on, blocks will be indented the way that Xcode does by default (from keyword if the parameter is on its own line; otherwise, from the previous indentation level).
-indent_oc_block_msg_xcode_style = false # false/true
-
-# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg keyword.
-indent_oc_block_msg_from_keyword = false # false/true
-
-# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg colon.
-indent_oc_block_msg_from_colon = false # false/true
-
-# If indent_oc_block_msg and this option are on, blocks will be indented from where the block caret is.
-indent_oc_block_msg_from_caret = false # false/true
-
-# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is.
-indent_oc_block_msg_from_brace = false # false/true
-
-# When indenting after virtual brace open and newline add further spaces to reach this min. indent.
-indent_min_vbrace_open = 0 # unsigned number
-
-# True: When identing after virtual brace open and newline add further spaces after regular indent to reach next tabstop.
-indent_vbrace_open_on_tabstop = false # false/true
-
-# If True, a brace followed by another token (not a newline) will indent all contained lines to match the token.Default=True.
-indent_token_after_brace = true # false/true
-
-# If True, cpp lambda body will be indentedDefault=False.
-indent_cpp_lambda_body = false # false/true
-
-# indent (or not) an using block if no braces are used. Only for C#.Default=True.
-indent_using_block = true # false/true
-
-# indent the continuation of ternary operator.
-# 0: (Default) off
-# 1: When the `if_false` is a continuation, indent it under `if_false`
-# 2: When the `:` is a continuation, indent it under `?`
-indent_ternary_operator = 0 # unsigned number
-
-# If true, the indentation of the chunks after a `return new` sequence will be set at return indentation column.
-indent_off_after_return_new = false # false/true
-
-# If true, the tokens after return are indented with regular single indentation.By default (false) the indentation is after the return token.
-indent_single_after_return = false # false/true
-
-# If true, ignore indent and align for asm blocks as they have their own indentation.
-indent_ignore_asm_block = false # false/true
-
-#
-# Newline adding and removing options
-#
-
-# Whether to collapse empty blocks between '{' and '}'.
-nl_collapse_empty_body = false # false/true
-
-# Don't split one-line braced assignments - 'foo_t f = { 1, 2 };'.
-nl_assign_leave_one_liners = false # false/true
-
-# Don't split one-line braced statements inside a class xx { } body.
-nl_class_leave_one_liners = false # false/true
-
-# Don't split one-line enums: 'enum foo { BAR = 15 };'
-nl_enum_leave_one_liners = false # false/true
-
-# Don't split one-line get or set functions.
-nl_getset_leave_one_liners = false # false/true
-
-# Don't split one-line get or set functions.
-nl_cs_property_leave_one_liners = false # false/true
-
-# Don't split one-line function definitions - 'int foo() { return 0; }'.
-nl_func_leave_one_liners = false # false/true
-
-# Don't split one-line C++11 lambdas - '[]() { return 0; }'.
-nl_cpp_lambda_leave_one_liners = false # false/true
-
-# Don't split one-line if/else statements - 'if(a) b++;'.
-nl_if_leave_one_liners = false # false/true
-
-# Don't split one-line while statements - 'while(a) b++;'.
-nl_while_leave_one_liners = false # false/true
-
-# Don't split one-line OC messages.
-nl_oc_msg_leave_one_liner = false # false/true
-
-# Add or remove newline between Objective-C block signature and '{'.
-nl_oc_block_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between @interface and '{'.
-nl_oc_interface_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between @implementation and '{'.
-nl_oc_implementation_brace = ignore # ignore/add/remove/force
-
-# Add or remove newlines at the start of the file.
-nl_start_of_file = ignore # ignore/add/remove/force
-
-# The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force'.
-nl_start_of_file_min = 0 # unsigned number
-
-# Add or remove newline at the end of the file.
-nl_end_of_file = ignore # ignore/add/remove/force
-
-# The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force').
-nl_end_of_file_min = 0 # unsigned number
-
-# Add or remove newline between '=' and '{'.
-nl_assign_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between '=' and '[' (D only).
-nl_assign_square = ignore # ignore/add/remove/force
-
-# Add or remove newline between '[]' and '{'.
-nl_tsquare_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline after '= [' (D only). Will also affect the newline before the ']'.
-nl_after_square_assign = ignore # ignore/add/remove/force
-
-# The number of blank lines after a block of variable definitions at the top of a function body
-# 0 = No change (default).
-nl_func_var_def_blk = 0 # unsigned number
-
-# The number of newlines before a block of typedefs
-# 0 = No change (default)
-# is overridden by the option 'nl_after_access_spec'.
-nl_typedef_blk_start = 0 # unsigned number
-
-# The number of newlines after a block of typedefs
-# 0 = No change (default).
-nl_typedef_blk_end = 0 # unsigned number
-
-# The maximum consecutive newlines within a block of typedefs
-# 0 = No change (default).
-nl_typedef_blk_in = 0 # unsigned number
-
-# The number of newlines before a block of variable definitions not at the top of a function body
-# 0 = No change (default)
-# is overridden by the option 'nl_after_access_spec'.
-nl_var_def_blk_start = 0 # unsigned number
-
-# The number of newlines after a block of variable definitions not at the top of a function body
-# 0 = No change (default).
-nl_var_def_blk_end = 0 # unsigned number
-
-# The maximum consecutive newlines within a block of variable definitions
-# 0 = No change (default).
-nl_var_def_blk_in = 0 # unsigned number
-
-# Add or remove newline between a function call's ')' and '{', as in:
-# list_for_each(item, &list) { }.
-nl_fcall_brace = add # ignore/add/remove/force
-
-# Add or remove newline between 'enum' and '{'.
-nl_enum_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'enum' and 'class'.
-nl_enum_class = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'enum class' and the identifier.
-nl_enum_class_identifier = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'enum class' type and ':'.
-nl_enum_identifier_colon = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'enum class identifier :' and 'type' and/or 'type'.
-nl_enum_colon_type = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'struct and '{'.
-nl_struct_brace = remove # ignore/add/remove/force
-
-# Add or remove newline between 'union' and '{'.
-nl_union_brace = remove # ignore/add/remove/force
-
-# Add or remove newline between 'if' and '{'.
-nl_if_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between '}' and 'else'.
-nl_brace_else = add # ignore/add/remove/force
-
-# Add or remove newline between 'else if' and '{'
-# If set to ignore, nl_if_brace is used instead.
-nl_elseif_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'else' and '{'.
-nl_else_brace = remove # ignore/add/remove/force
-
-# Add or remove newline between 'else' and 'if'.
-nl_else_if = ignore # ignore/add/remove/force
-
-# Add or remove newline before 'if'/'else if' closing parenthesis.
-nl_before_if_closing_paren = ignore # ignore/add/remove/force
-
-# Add or remove newline between '}' and 'finally'.
-nl_brace_finally = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'finally' and '{'.
-nl_finally_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'try' and '{'.
-nl_try_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between get/set and '{'.
-nl_getset_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'for' and '{'.
-nl_for_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'catch' and '{'.
-nl_catch_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between '@catch' and '{'.
-# If set to ignore, nl_catch_brace is used.
-nl_oc_catch_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between '}' and 'catch'.
-nl_brace_catch = ignore # ignore/add/remove/force
-
-# Add or remove newline between '}' and 'catch'.
-# If set to ignore, nl_brace_catch is used.
-nl_oc_brace_catch = ignore # ignore/add/remove/force
-
-# Add or remove newline between '}' and ']'.
-nl_brace_square = ignore # ignore/add/remove/force
-
-# Add or remove newline between '}' and ')' in a function invocation.
-nl_brace_fparen = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'while' and '{'.
-nl_while_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'scope (x)' and '{' (D).
-nl_scope_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'unittest' and '{' (D).
-nl_unittest_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'version (x)' and '{' (D).
-nl_version_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'using' and '{'.
-nl_using_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between two open or close braces.
-# Due to general newline/brace handling, REMOVE may not work.
-nl_brace_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'do' and '{'.
-nl_do_brace = remove # ignore/add/remove/force
-
-# Add or remove newline between '}' and 'while' of 'do' statement.
-nl_brace_while = remove # ignore/add/remove/force
-
-# Add or remove newline between 'switch' and '{'.
-nl_switch_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'synchronized' and '{'.
-nl_synchronized_brace = ignore # ignore/add/remove/force
-
-# Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc.
-# Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch and nl_catch_brace.
-nl_multi_line_cond = false # false/true
-
-# Force a newline in a define after the macro name for multi-line defines.
-nl_multi_line_define = false # false/true
-
-# Whether to put a newline before 'case' statement, not after the first 'case'.
-nl_before_case = false # false/true
-
-# Add or remove newline between ')' and 'throw'.
-nl_before_throw = ignore # ignore/add/remove/force
-
-# Whether to put a newline after 'case' statement.
-nl_after_case = false # false/true
-
-# Add or remove a newline between a case ':' and '{'. Overrides nl_after_case.
-nl_case_colon_brace = ignore # ignore/add/remove/force
-
-# Newline between namespace and {.
-nl_namespace_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'template<>' and whatever follows.
-nl_template_class = ignore # ignore/add/remove/force
-
-# Add or remove newline between 'class' and '{'.
-nl_class_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline before/after each ',' in the base class list,
-# (tied to pos_class_comma).
-nl_class_init_args = ignore # ignore/add/remove/force
-
-# Add or remove newline after each ',' in the constructor member initialization.
-# Related to nl_constr_colon, pos_constr_colon and pos_constr_comma.
-nl_constr_init_args = ignore # ignore/add/remove/force
-
-# Add or remove newline before first element, after comma, and after last element in enum.
-nl_enum_own_lines = ignore # ignore/add/remove/force
-
-# Add or remove newline between return type and function name in a function definition.
-nl_func_type_name = ignore # ignore/add/remove/force
-
-# Add or remove newline between return type and function name inside a class {}
-# Uses nl_func_type_name or nl_func_proto_type_name if set to ignore.
-nl_func_type_name_class = ignore # ignore/add/remove/force
-
-# Add or remove newline between class specification and '::' in 'void A::f() { }'
-# Only appears in separate member implementation (does not appear with in-line implmementation).
-nl_func_class_scope = ignore # ignore/add/remove/force
-
-# Add or remove newline between function scope and name
-# Controls the newline after '::' in 'void A::f() { }'.
-nl_func_scope_name = ignore # ignore/add/remove/force
-
-# Add or remove newline between return type and function name in a prototype.
-nl_func_proto_type_name = ignore # ignore/add/remove/force
-
-# Add or remove newline between a function name and the opening '(' in the declaration.
-nl_func_paren = ignore # ignore/add/remove/force
-
-# Overrides nl_func_paren for functions with no parameters.
-nl_func_paren_empty = ignore # ignore/add/remove/force
-
-# Add or remove newline between a function name and the opening '(' in the definition.
-nl_func_def_paren = ignore # ignore/add/remove/force
-
-# Overrides nl_func_def_paren for functions with no parameters.
-nl_func_def_paren_empty = ignore # ignore/add/remove/force
-
-# Add or remove newline between a function name and the opening '(' in the call
-nl_func_call_paren = ignore # ignore/add/remove/force
-
-# Overrides nl_func_call_paren for functions with no parameters.
-nl_func_call_paren_empty = ignore # ignore/add/remove/force
-
-# Add or remove newline after '(' in a function declaration.
-nl_func_decl_start = ignore # ignore/add/remove/force
-
-# Add or remove newline after '(' in a function definition.
-nl_func_def_start = ignore # ignore/add/remove/force
-
-# Overrides nl_func_decl_start when there is only one parameter.
-nl_func_decl_start_single = ignore # ignore/add/remove/force
-
-# Overrides nl_func_def_start when there is only one parameter.
-nl_func_def_start_single = ignore # ignore/add/remove/force
-
-# Whether to add newline after '(' in a function declaration if '(' and ')' are in different lines.
-nl_func_decl_start_multi_line = false # false/true
-
-# Whether to add newline after '(' in a function definition if '(' and ')' are in different lines.
-nl_func_def_start_multi_line = false # false/true
-
-# Add or remove newline after each ',' in a function declaration.
-nl_func_decl_args = ignore # ignore/add/remove/force
-
-# Add or remove newline after each ',' in a function definition.
-nl_func_def_args = ignore # ignore/add/remove/force
-
-# Whether to add newline after each ',' in a function declaration if '(' and ')' are in different lines.
-nl_func_decl_args_multi_line = false # false/true
-
-# Whether to add newline after each ',' in a function definition if '(' and ')' are in different lines.
-nl_func_def_args_multi_line = false # false/true
-
-# Add or remove newline before the ')' in a function declaration.
-nl_func_decl_end = ignore # ignore/add/remove/force
-
-# Add or remove newline before the ')' in a function definition.
-nl_func_def_end = ignore # ignore/add/remove/force
-
-# Overrides nl_func_decl_end when there is only one parameter.
-nl_func_decl_end_single = ignore # ignore/add/remove/force
-
-# Overrides nl_func_def_end when there is only one parameter.
-nl_func_def_end_single = ignore # ignore/add/remove/force
-
-# Whether to add newline before ')' in a function declaration if '(' and ')' are in different lines.
-nl_func_decl_end_multi_line = false # false/true
-
-# Whether to add newline before ')' in a function definition if '(' and ')' are in different lines.
-nl_func_def_end_multi_line = false # false/true
-
-# Add or remove newline between '()' in a function declaration.
-nl_func_decl_empty = ignore # ignore/add/remove/force
-
-# Add or remove newline between '()' in a function definition.
-nl_func_def_empty = ignore # ignore/add/remove/force
-
-# Add or remove newline between '()' in a function call.
-nl_func_call_empty = ignore # ignore/add/remove/force
-
-# Whether to add newline after '(' in a function call if '(' and ')' are in different lines.
-nl_func_call_start_multi_line = false # false/true
-
-# Whether to add newline after each ',' in a function call if '(' and ')' are in different lines.
-nl_func_call_args_multi_line = false # false/true
-
-# Whether to add newline before ')' in a function call if '(' and ')' are in different lines.
-nl_func_call_end_multi_line = false # false/true
-
-# Whether to put each OC message parameter on a separate line
-# See nl_oc_msg_leave_one_liner.
-nl_oc_msg_args = false # false/true
-
-# Add or remove newline between function signature and '{'.
-nl_fdef_brace = ignore # ignore/add/remove/force
-
-# Add or remove newline between C++11 lambda signature and '{'.
-nl_cpp_ldef_brace = ignore # ignore/add/remove/force
-
-# Add or remove a newline between the return keyword and return expression.
-nl_return_expr = ignore # ignore/add/remove/force
-
-# Whether to put a newline after semicolons, except in 'for' statements.
-nl_after_semicolon = false # false/true
-
-# Java: Control the newline between the ')' and '{{' of the double brace initializer.
-nl_paren_dbrace_open = ignore # ignore/add/remove/force
-
-# Whether to put a newline after the type in an unnamed temporary direct-list-initialization.
-nl_type_brace_init_lst = ignore # ignore/add/remove/force
-
-# Whether to put a newline after open brace in an unnamed temporary direct-list-initialization.
-nl_type_brace_init_lst_open = ignore # ignore/add/remove/force
-
-# Whether to put a newline before close brace in an unnamed temporary direct-list-initialization.
-nl_type_brace_init_lst_close = ignore # ignore/add/remove/force
-
-# Whether to put a newline after brace open.
-# This also adds a newline before the matching brace close.
-nl_after_brace_open = false # false/true
-
-# If nl_after_brace_open and nl_after_brace_open_cmt are True, a newline is
-# placed between the open brace and a trailing single-line comment.
-nl_after_brace_open_cmt = false # false/true
-
-# Whether to put a newline after a virtual brace open with a non-empty body.
-# These occur in un-braced if/while/do/for statement bodies.
-nl_after_vbrace_open = false # false/true
-
-# Whether to put a newline after a virtual brace open with an empty body.
-# These occur in un-braced if/while/do/for statement bodies.
-nl_after_vbrace_open_empty = false # false/true
-
-# Whether to put a newline after a brace close.
-# Does not apply if followed by a necessary ';'.
-nl_after_brace_close = false # false/true
-
-# Whether to put a newline after a virtual brace close.
-# Would add a newline before return in: 'if (foo) a++; return;'.
-nl_after_vbrace_close = false # false/true
-
-# Control the newline between the close brace and 'b' in: 'struct { int a; } b;'
-# Affects enums, unions and structures. If set to ignore, uses nl_after_brace_close.
-nl_brace_struct_var = ignore # ignore/add/remove/force
-
-# Whether to alter newlines in '#define' macros.
-nl_define_macro = false # false/true
-
-# Whether to alter newlines between consecutive paren closes,
-# The number of closing paren in a line will depend on respective open paren lines
-nl_squeeze_paren_close = false # false/true
-
-# Whether to remove blanks after '#ifxx' and '#elxx', or before '#elxx' and '#endif'. Does not affect top-level #ifdefs.
-nl_squeeze_ifdef = false # false/true
-
-# Makes the nl_squeeze_ifdef option affect the top-level #ifdefs as well.
-nl_squeeze_ifdef_top_level = false # false/true
-
-# Add or remove blank line before 'if'.
-nl_before_if = ignore # ignore/add/remove/force
-
-# Add or remove blank line after 'if' statement.
-# Add/Force work only if the next token is not a closing brace.
-nl_after_if = ignore # ignore/add/remove/force
-
-# Add or remove blank line before 'for'.
-nl_before_for = ignore # ignore/add/remove/force
-
-# Add or remove blank line after 'for' statement.
-nl_after_for = ignore # ignore/add/remove/force
-
-# Add or remove blank line before 'while'.
-nl_before_while = ignore # ignore/add/remove/force
-
-# Add or remove blank line after 'while' statement.
-nl_after_while = ignore # ignore/add/remove/force
-
-# Add or remove blank line before 'switch'.
-nl_before_switch = ignore # ignore/add/remove/force
-
-# Add or remove blank line after 'switch' statement.
-nl_after_switch = ignore # ignore/add/remove/force
-
-# Add or remove blank line before 'synchronized'.
-nl_before_synchronized = ignore # ignore/add/remove/force
-
-# Add or remove blank line after 'synchronized' statement.
-nl_after_synchronized = ignore # ignore/add/remove/force
-
-# Add or remove blank line before 'do'.
-nl_before_do = ignore # ignore/add/remove/force
-
-# Add or remove blank line after 'do/while' statement.
-nl_after_do = ignore # ignore/add/remove/force
-
-# Whether to double-space commented-entries in struct/union/enum.
-nl_ds_struct_enum_cmt = false # false/true
-
-# force nl before } of a struct/union/enum
-# (lower priority than 'eat_blanks_before_close_brace').
-nl_ds_struct_enum_close_brace = false # false/true
-
-# Add or remove blank line before 'func_class_def'.
-nl_before_func_class_def = 0 # unsigned number
-
-# Add or remove blank line before 'func_class_proto'.
-nl_before_func_class_proto = 0 # unsigned number
-
-# Add or remove a newline before/after a class colon,
-# (tied to pos_class_colon).
-nl_class_colon = ignore # ignore/add/remove/force
-
-# Add or remove a newline around a class constructor colon.
-# Related to nl_constr_init_args, pos_constr_colon and pos_constr_comma.
-nl_constr_colon = ignore # ignore/add/remove/force
-
-# If true turns two liner namespace to one liner,else will make then four liners
-nl_namespace_two_to_one_liner = false # false/true
-
-# Change simple unbraced if statements into a one-liner
-# 'if(b)\n i++;' => 'if(b) i++;'.
-nl_create_if_one_liner = false # false/true
-
-# Change simple unbraced for statements into a one-liner
-# 'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);'.
-nl_create_for_one_liner = false # false/true
-
-# Change simple unbraced while statements into a one-liner
-# 'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);'.
-nl_create_while_one_liner = false # false/true
-
-# Change simple 4,3,2 liner function def statements into a one-liner
-nl_create_func_def_one_liner = false # false/true
-
-# Change a one-liner if statement into simple unbraced if
-# 'if(b) i++;' => 'if(b)\n i++;'.
-nl_split_if_one_liner = false # false/true
-
-# Change a one-liner for statement into simple unbraced for
-# 'for (i=0;<5;i++) foo(i);' => 'for (i=0;<5;i++)\n foo(i);'.
-nl_split_for_one_liner = false # false/true
-
-# Change a one-liner while statement into simple unbraced while
-# 'while (i<5) foo(i++);' => 'while (i<5)\n foo(i++);'.
-nl_split_while_one_liner = false # false/true
-
-#
-# Blank line options
-#
-
-# The maximum consecutive newlines (3 = 2 blank lines).
-nl_max = 0 # unsigned number
-
-# The maximum consecutive newlines in function.
-nl_max_blank_in_func = 0 # unsigned number
-
-# The number of newlines after a function prototype, if followed by another function prototype.
-nl_after_func_proto = 0 # unsigned number
-
-# The number of newlines after a function prototype, if not followed by another function prototype.
-nl_after_func_proto_group = 0 # unsigned number
-
-# The number of newlines after a function class prototype, if followed by another function class prototype.
-nl_after_func_class_proto = 0 # unsigned number
-
-# The number of newlines after a function class prototype, if not followed by another function class prototype.
-nl_after_func_class_proto_group = 0 # unsigned number
-
-# The number of newlines before a multi-line function def body.
-nl_before_func_body_def = 0 # unsigned number
-
-# The number of newlines before a multi-line function prototype body.
-nl_before_func_body_proto = 0 # unsigned number
-
-# The number of newlines after '}' of a multi-line function body.
-nl_after_func_body = 0 # unsigned number
-
-# The number of newlines after '}' of a multi-line function body in a class declaration.
-nl_after_func_body_class = 0 # unsigned number
-
-# The number of newlines after '}' of a single line function body.
-nl_after_func_body_one_liner = 0 # unsigned number
-
-# The minimum number of newlines before a multi-line comment.
-# Doesn't apply if after a brace open or another multi-line comment.
-nl_before_block_comment = 0 # unsigned number
-
-# The minimum number of newlines before a single-line C comment.
-# Doesn't apply if after a brace open or other single-line C comments.
-nl_before_c_comment = 0 # unsigned number
-
-# The minimum number of newlines before a CPP comment.
-# Doesn't apply if after a brace open or other CPP comments.
-nl_before_cpp_comment = 0 # unsigned number
-
-# Whether to force a newline after a multi-line comment.
-nl_after_multiline_comment = false # false/true
-
-# Whether to force a newline after a label's colon.
-nl_after_label_colon = false # false/true
-
-# The number of newlines after '}' or ';' of a struct/enum/union definition.
-nl_after_struct = 0 # unsigned number
-
-# The number of newlines before a class definition.
-nl_before_class = 0 # unsigned number
-
-# The number of newlines after '}' or ';' of a class definition.
-nl_after_class = 0 # unsigned number
-
-# The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
-# Will not change the newline count if after a brace open.
-# 0 = No change.
-nl_before_access_spec = 0 # unsigned number
-
-# The number of newlines after a 'private:', 'public:', 'protected:', 'signals:' or 'slots:' label.
-# 0 = No change.
-# Overrides 'nl_typedef_blk_start' and 'nl_var_def_blk_start'.
-nl_after_access_spec = 0 # unsigned number
-
-# The number of newlines between a function def and the function comment.
-# 0 = No change.
-nl_comment_func_def = 0 # unsigned number
-
-# The number of newlines after a try-catch-finally block that isn't followed by a brace close.
-# 0 = No change.
-nl_after_try_catch_finally = 0 # unsigned number
-
-# The number of newlines before and after a property, indexer or event decl.
-# 0 = No change.
-nl_around_cs_property = 0 # unsigned number
-
-# The number of newlines between the get/set/add/remove handlers in C#.
-# 0 = No change.
-nl_between_get_set = 0 # unsigned number
-
-# Add or remove newline between C# property and the '{'.
-nl_property_brace = ignore # ignore/add/remove/force
-
-# Whether to remove blank lines after '{'.
-eat_blanks_after_open_brace = false # false/true
-
-# Whether to remove blank lines before '}'.
-eat_blanks_before_close_brace = false # false/true
-
-# How aggressively to remove extra newlines not in preproc.
-# 0: No change
-# 1: Remove most newlines not handled by other config
-# 2: Remove all newlines and reformat completely by config
-nl_remove_extra_newlines = 0 # unsigned number
-
-# Whether to put a blank line before 'return' statements, unless after an open brace.
-nl_before_return = false # false/true
-
-# Whether to put a blank line after 'return' statements, unless followed by a close brace.
-nl_after_return = false # false/true
-
-# Whether to put a newline after a Java annotation statement.
-# Only affects annotations that are after a newline.
-nl_after_annotation = ignore # ignore/add/remove/force
-
-# Controls the newline between two annotations.
-nl_between_annotation = ignore # ignore/add/remove/force
-
-#
-# Positioning options
-#
-
-# The position of arithmetic operators in wrapped expressions.
-pos_arith = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of assignment in wrapped expressions.
-# Do not affect '=' followed by '{'.
-pos_assign = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of boolean operators in wrapped expressions.
-pos_bool = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of comparison operators in wrapped expressions.
-pos_compare = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of conditional (b ? t : f) operators in wrapped expressions.
-pos_conditional = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of the comma in wrapped expressions.
-pos_comma = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of the comma in enum entries.
-pos_enum_comma = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of the comma in the base class list if there are more than one line,
-# (tied to nl_class_init_args).
-pos_class_comma = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of the comma in the constructor initialization list.
-# Related to nl_constr_colon, nl_constr_init_args and pos_constr_colon.
-pos_constr_comma = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of trailing/leading class colon, between class and base class list
-# (tied to nl_class_colon).
-pos_class_colon = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-# The position of colons between constructor and member initialization,
-# (tied to nl_constr_colon).
-# Related to nl_constr_colon, nl_constr_init_args and pos_constr_comma.
-pos_constr_colon = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-
-#
-# Line Splitting options
-#
-
-# Try to limit code width to N number of columns
-code_width = 0 # unsigned number
-
-# Whether to fully split long 'for' statements at semi-colons.
-ls_for_split_full = false # false/true
-
-# Whether to fully split long function protos/calls at commas.
-ls_func_split_full = false # false/true
-
-# Whether to split lines as close to code_width as possible and ignore some groupings.
-ls_code_width = false # false/true
-
-#
-# Code alignment (not left column spaces/tabs)
-#
-
-# Whether to keep non-indenting tabs.
-align_keep_tabs = false # false/true
-
-# Whether to use tabs for aligning.
-align_with_tabs = false # false/true
-
-# Whether to bump out to the next tab when aligning.
-align_on_tabstop = false # false/true
-
-# Whether to right-align numbers.
-align_number_right = false # false/true
-
-# Whether to keep whitespace not required for alignment.
-align_keep_extra_space = false # false/true
-
-# Align variable definitions in prototypes and functions.
-align_func_params = false # false/true
-
-# The span for aligning parameter definitions in function on parameter name (0=don't align).
-align_func_params_span = 0 # unsigned number
-
-# The threshold for aligning function parameter definitions (0=no limit).
-align_func_params_thresh = 0 # unsigned number
-
-# The gap for aligning function parameter definitions.
-align_func_params_gap = 0 # unsigned number
-
-# Align parameters in single-line functions that have the same name.
-# The function names must already be aligned with each other.
-align_same_func_call_params = false # false/true
-
-# The span for aligning variable definitions (0=don't align)
-align_var_def_span = 0 # unsigned number
-
-# How to align the star in variable definitions.
-# 0=Part of the type 'void * foo;'
-# 1=Part of the variable 'void *foo;'
-# 2=Dangling 'void *foo;'
-align_var_def_star_style = 2 # unsigned number
-
-# How to align the '&' in variable definitions.
-# 0=Part of the type
-# 1=Part of the variable
-# 2=Dangling
-align_var_def_amp_style = 2 # unsigned number
-
-# The threshold for aligning variable definitions (0=no limit)
-align_var_def_thresh = 0 # unsigned number
-
-# The gap for aligning variable definitions.
-align_var_def_gap = 0 # unsigned number
-
-# Whether to align the colon in struct bit fields.
-align_var_def_colon = false # false/true
-
-# align variable defs gap for bit colons.
-align_var_def_colon_gap = 0 # unsigned number
-
-# Whether to align any attribute after the variable name.
-align_var_def_attribute = false # false/true
-
-# Whether to align inline struct/enum/union variable definitions.
-align_var_def_inline = false # false/true
-
-# The span for aligning on '=' in assignments (0=don't align)
-align_assign_span = 0 # unsigned number
-
-# The threshold for aligning on '=' in assignments (0=no limit)
-align_assign_thresh = 0 # unsigned number
-
-# The span for aligning on '=' in enums (0=don't align)
-align_enum_equ_span = 0 # unsigned number
-
-# The threshold for aligning on '=' in enums (0=no limit)
-align_enum_equ_thresh = 0 # unsigned number
-
-# The span for aligning class (0=don't align)
-align_var_class_span = 0 # unsigned number
-
-# The threshold for aligning class member definitions (0=no limit).
-align_var_class_thresh = 0 # unsigned number
-
-# The gap for aligning class member definitions.
-align_var_class_gap = 0 # unsigned number
-
-# The span for aligning struct/union (0=don't align)
-align_var_struct_span = 0 # unsigned number
-
-# The threshold for aligning struct/union member definitions (0=no limit)
-align_var_struct_thresh = 0 # unsigned number
-
-# The gap for aligning struct/union member definitions.
-align_var_struct_gap = 0 # unsigned number
-
-# The span for aligning struct initializer values (0=don't align)
-align_struct_init_span = 0 # unsigned number
-
-# The minimum space between the type and the synonym of a typedef.
-align_typedef_gap = 0 # unsigned number
-
-# The span for aligning single-line typedefs (0=don't align).
-align_typedef_span = 0 # unsigned number
-
-# How to align typedef'd functions with other typedefs
-# 0: Don't mix them at all
-# 1: align the open paren with the types
-# 2: align the function type name with the other type names
-align_typedef_func = 0 # unsigned number
-
-# Controls the positioning of the '*' in typedefs. Just try it.
-# 0: Align on typedef type, ignore '*'
-# 1: The '*' is part of type name: typedef int *pint;
-# 2: The '*' is part of the type, but dangling: typedef int *pint;
-align_typedef_star_style = 2 # unsigned number
-
-# Controls the positioning of the '&' in typedefs. Just try it.
-# 0: Align on typedef type, ignore '&'
-# 1: The '&' is part of type name: typedef int &pint;
-# 2: The '&' is part of the type, but dangling: typedef int &pint;
-align_typedef_amp_style = 2 # unsigned number
-
-# The span for aligning comments that end lines (0=don't align)
-align_right_cmt_span = 0 # unsigned number
-
-# If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment.
-align_right_cmt_mix = false # false/true
-
-# If a trailing comment is more than this number of columns away from the text it follows,
-# it will qualify for being aligned. This has to be > 0 to do anything.
-align_right_cmt_gap = 0 # unsigned number
-
-# Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore)
-align_right_cmt_at_col = 0 # unsigned number
-
-# The span for aligning function prototypes (0=don't align).
-align_func_proto_span = 0 # unsigned number
-
-# Minimum gap between the return type and the function name.
-align_func_proto_gap = 0 # unsigned number
-
-# Align function protos on the 'operator' keyword instead of what follows.
-align_on_operator = false # false/true
-
-# Whether to mix aligning prototype and variable declarations.
-# If True, align_var_def_XXX options are used instead of align_func_proto_XXX options.
-align_mix_var_proto = false # false/true
-
-# Align single-line functions with function prototypes, uses align_func_proto_span.
-align_single_line_func = false # false/true
-
-# Aligning the open brace of single-line functions.
-# Requires align_single_line_func=True, uses align_func_proto_span.
-align_single_line_brace = false # false/true
-
-# Gap for align_single_line_brace.
-align_single_line_brace_gap = 0 # unsigned number
-
-# The span for aligning ObjC msg spec (0=don't align)
-align_oc_msg_spec_span = 0 # unsigned number
-
-# Whether to align macros wrapped with a backslash and a newline.
-# This will not work right if the macro contains a multi-line comment.
-align_nl_cont = false # false/true
-
-# # Align macro functions and variables together.
-align_pp_define_together = false # false/true
-
-# The minimum space between label and value of a preprocessor define.
-align_pp_define_gap = 0 # unsigned number
-
-# The span for aligning on '#define' bodies (0=don't align, other=number of lines including comments between blocks)
-align_pp_define_span = 0 # unsigned number
-
-# Align lines that start with '<<' with previous '<<'. Default=True.
-align_left_shift = true # false/true
-
-# Align text after asm volatile () colons.
-align_asm_colon = false # false/true
-
-# Span for aligning parameters in an Obj-C message call on the ':' (0=don't align)
-align_oc_msg_colon_span = 0 # unsigned number
-
-# If True, always align with the first parameter, even if it is too short.
-align_oc_msg_colon_first = false # false/true
-
-# Aligning parameters in an Obj-C '+' or '-' declaration on the ':'.
-align_oc_decl_colon = false # false/true
-
-#
-# Comment modifications
-#
-
-# Try to wrap comments at cmt_width columns
-cmt_width = 0 # unsigned number
-
-# Set the comment reflow mode (Default=0)
-# 0: no reflowing (apart from the line wrapping due to cmt_width)
-# 1: no touching at all
-# 2: full reflow
-cmt_reflow_mode = 0 # unsigned number
-
-# Whether to convert all tabs to spaces in comments. Default is to leave tabs inside comments alone, unless used for indenting.
-cmt_convert_tab_to_spaces = false # false/true
-
-# If False, disable all multi-line comment changes, including cmt_width. keyword substitution and leading chars.
-# Default=True.
-cmt_indent_multi = true # false/true
-
-# Whether to group c-comments that look like they are in a block.
-cmt_c_group = false # false/true
-
-# Whether to put an empty '/*' on the first line of the combined c-comment.
-cmt_c_nl_start = false # false/true
-
-# Whether to put a newline before the closing '*/' of the combined c-comment.
-cmt_c_nl_end = false # false/true
-
-# Whether to group cpp-comments that look like they are in a block.
-cmt_cpp_group = false # false/true
-
-# Whether to put an empty '/*' on the first line of the combined cpp-comment.
-cmt_cpp_nl_start = false # false/true
-
-# Whether to put a newline before the closing '*/' of the combined cpp-comment.
-cmt_cpp_nl_end = false # false/true
-
-# Whether to change cpp-comments into c-comments.
-cmt_cpp_to_c = false # false/true
-
-# Whether to put a star on subsequent comment lines.
-cmt_star_cont = false # false/true
-
-# The number of spaces to insert at the start of subsequent comment lines.
-cmt_sp_before_star_cont = 0 # unsigned number
-
-# The number of spaces to insert after the star on subsequent comment lines.
-cmt_sp_after_star_cont = 0 # number
-
-# For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
-# the comment are the same length. Default=True.
-cmt_multi_check_last = true # false/true
-
-# For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
-# the comment are the same length AND if the length is bigger as the first_len minimum. Default=4
-cmt_multi_first_len_minimum = 4 # unsigned number
-
-# The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment.
-# Will substitute $(filename) with the current file's name.
-cmt_insert_file_header = "" # string
-
-# The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment.
-# Will substitute $(filename) with the current file's name.
-cmt_insert_file_footer = "" # string
-
-# The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment.
-# Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff.
-# Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... }.
-cmt_insert_func_header = "" # string
-
-# The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment.
-# Will substitute $(class) with the class name.
-cmt_insert_class_header = "" # string
-
-# The filename that contains text to insert before a Obj-C message specification if the method isn't preceded with a C/C++ comment.
-# Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff.
-cmt_insert_oc_msg_header = "" # string
-
-# If a preprocessor is encountered when stepping backwards from a function name, then
-# this option decides whether the comment should be inserted.
-# Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header.
-cmt_insert_before_preproc = false # false/true
-
-# If a function is declared inline to a class definition, then
-# this option decides whether the comment should be inserted.
-# Affects cmt_insert_func_header.
-cmt_insert_before_inlines = true # false/true
-
-# If the function is a constructor/destructor, then
-# this option decides whether the comment should be inserted.
-# Affects cmt_insert_func_header.
-cmt_insert_before_ctor_dtor = false # false/true
-
-#
-# Code modifying options (non-whitespace)
-#
-
-# Add or remove braces on single-line 'do' statement.
-mod_full_brace_do = ignore # ignore/add/remove/force
-
-# Add or remove braces on single-line 'for' statement.
-mod_full_brace_for = ignore # ignore/add/remove/force
-
-# Add or remove braces on single-line function definitions. (Pawn).
-mod_full_brace_function = ignore # ignore/add/remove/force
-
-# Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'.
-mod_full_brace_if = ignore # ignore/add/remove/force
-
-# Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if.
-# If any must be braced, they are all braced. If all can be unbraced, then the braces are removed.
-mod_full_brace_if_chain = false # false/true
-
-# Make all if/elseif/else statements with at least one 'else' or 'else if' fully braced.
-# If mod_full_brace_if_chain is used together with this option, all if-else chains will get braces,
-# and simple 'if' statements will lose them (if possible).
-mod_full_brace_if_chain_only = false # false/true
-
-# Don't remove braces around statements that span N newlines
-mod_full_brace_nl = 0 # unsigned number
-
-# Blocks removal of braces if the parenthesis of if/for/while/.. span multiple lines.
-mod_full_brace_nl_block_rem_mlcond = false # false/true
-
-# Add or remove braces on single-line 'while' statement.
-mod_full_brace_while = ignore # ignore/add/remove/force
-
-# Add or remove braces on single-line 'using ()' statement.
-mod_full_brace_using = ignore # ignore/add/remove/force
-
-# Add or remove unnecessary paren on 'return' statement.
-mod_paren_on_return = ignore # ignore/add/remove/force
-
-# Whether to change optional semicolons to real semicolons.
-mod_pawn_semicolon = false # false/true
-
-# Add parens on 'while' and 'if' statement around bools.
-mod_full_paren_if_bool = false # false/true
-
-# Whether to remove superfluous semicolons.
-mod_remove_extra_semicolon = false # false/true
-
-# If a function body exceeds the specified number of newlines and doesn't have a comment after
-# the close brace, a comment will be added.
-mod_add_long_function_closebrace_comment = 0 # unsigned number
-
-# If a namespace body exceeds the specified number of newlines and doesn't have a comment after
-# the close brace, a comment will be added.
-mod_add_long_namespace_closebrace_comment = 0 # unsigned number
-
-# If a class body exceeds the specified number of newlines and doesn't have a comment after
-# the close brace, a comment will be added.
-mod_add_long_class_closebrace_comment = 0 # unsigned number
-
-# If a switch body exceeds the specified number of newlines and doesn't have a comment after
-# the close brace, a comment will be added.
-mod_add_long_switch_closebrace_comment = 0 # unsigned number
-
-# If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after
-# the #endif, a comment will be added.
-mod_add_long_ifdef_endif_comment = 0 # unsigned number
-
-# If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after
-# the #else, a comment will be added.
-mod_add_long_ifdef_else_comment = 0 # unsigned number
-
-# If True, will sort consecutive single-line 'import' statements [Java, D].
-mod_sort_import = false # false/true
-
-# If True, will sort consecutive single-line 'using' statements [C#].
-mod_sort_using = false # false/true
-
-# If True, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C]
-# This is generally a bad idea, as it may break your code.
-mod_sort_include = false # false/true
-
-# If True, it will move a 'break' that appears after a fully braced 'case' before the close brace.
-mod_move_case_break = false # false/true
-
-# Will add or remove the braces around a fully braced case statement.
-# Will only remove the braces if there are no variable declarations in the block.
-mod_case_brace = ignore # ignore/add/remove/force
-
-# If True, it will remove a void 'return;' that appears as the last statement in a function.
-mod_remove_empty_return = false # false/true
-
-# If True, it will organize the properties (Obj-C).
-mod_sort_oc_properties = false # false/true
-
-# Determines weight of class property modifier (Obj-C).
-mod_sort_oc_property_class_weight = 0 # number
-
-# Determines weight of atomic, nonatomic (Obj-C).
-mod_sort_oc_property_thread_safe_weight = 0 # number
-
-# Determines weight of readwrite (Obj-C).
-mod_sort_oc_property_readwrite_weight = 0 # number
-
-# Determines weight of reference type (retain, copy, assign, weak, strong) (Obj-C).
-mod_sort_oc_property_reference_weight = 0 # number
-
-# Determines weight of getter type (getter=) (Obj-C).
-mod_sort_oc_property_getter_weight = 0 # number
-
-# Determines weight of setter type (setter=) (Obj-C).
-mod_sort_oc_property_setter_weight = 0 # number
-
-# Determines weight of nullability type (nullable, nonnull, null_unspecified, null_resettable) (Obj-C).
-mod_sort_oc_property_nullability_weight = 0 # number
-
-#
-# Preprocessor options
-#
-
-# Control indent of preprocessors inside #if blocks at brace level 0 (file-level).
-pp_indent = ignore # ignore/add/remove/force
-
-# Whether to indent #if/#else/#endif at the brace level (True) or from column 1 (False).
-pp_indent_at_level = false # false/true
-
-# Specifies the number of columns to indent preprocessors per level at brace level 0 (file-level).
-# If pp_indent_at_level=False, specifies the number of columns to indent preprocessors per level at brace level > 0 (function-level).
-# Default=1.
-pp_indent_count = 1 # unsigned number
-
-# Add or remove space after # based on pp_level of #if blocks.
-pp_space = ignore # ignore/add/remove/force
-
-# Sets the number of spaces added with pp_space.
-pp_space_count = 0 # unsigned number
-
-# The indent for #region and #endregion in C# and '#pragma region' in C/C++.
-pp_indent_region = 0 # number
-
-# Whether to indent the code between #region and #endregion.
-pp_region_indent_code = false # false/true
-
-# If pp_indent_at_level=True, sets the indent for #if, #else and #endif when not at file-level.
-# 0: indent preprocessors using output_tab_size.
-# >0: column at which all preprocessors will be indented.
-pp_indent_if = 0 # number
-
-# Control whether to indent the code between #if, #else and #endif.
-pp_if_indent_code = false # false/true
-
-# Whether to indent '#define' at the brace level (True) or from column 1 (false).
-pp_define_at_level = false # false/true
-
-# Whether to ignore the '#define' body while formatting.
-pp_ignore_define_body = false # false/true
-
-# Whether to indent case statements between #if, #else, and #endif.
-# Only applies to the indent of the preprocesser that the case statements directly inside of.
-pp_indent_case = true # false/true
-
-# Whether to indent whole function definitions between #if, #else, and #endif.
-# Only applies to the indent of the preprocesser that the function definition is directly inside of.
-pp_indent_func_def = true # false/true
-
-# Whether to indent extern C blocks between #if, #else, and #endif.
-# Only applies to the indent of the preprocesser that the extern block is directly inside of.
-pp_indent_extern = true # false/true
-
-# Whether to indent braces directly inside #if, #else, and #endif.
-# Only applies to the indent of the preprocesser that the braces are directly inside of.
-pp_indent_brace = true # false/true
-
-#
-# Sort includes options
-#
-
-# The regex for include category with priority 0.
-include_category_0 = "" # string
-
-# The regex for include category with priority 1.
-include_category_1 = "" # string
-
-# The regex for include category with priority 2.
-include_category_2 = "" # string
-
-#
-# Use or Do not Use options
-#
-
-# True: indent_func_call_param will be used (default)
-# False: indent_func_call_param will NOT be used.
-use_indent_func_call_param = true # false/true
-
-# The value of the indentation for a continuation line is calculate differently if the statement is:
-# a declaration: your case with QString fileName ...
-# an assignment: your case with pSettings = new QSettings( ...
-# At the second case the indentation value might be used twice:
-# at the assignment
-# at the function call (if present)
-# To prevent the double use of the indentation value, use this option with the value 'True'.
-# True: indent_continue will be used only once
-# False: indent_continue will be used every time (default).
-use_indent_continue_only_once = false # false/true
-
-# the value might be used twice:
-# at the assignment
-# at the opening brace
-# To prevent the double use of the indentation value, use this option with the value 'True'.
-# True: indentation will be used only once
-# False: indentation will be used every time (default).
-indent_cpp_lambda_only_once = false # false/true
-
-# SIGNAL/SLOT Qt macros have special formatting options. See options_for_QT.cpp for details.
-# Default=True.
-use_options_overriding_for_qt_macros = true # false/true
-
-#
-# Warn levels - 1: error, 2: warning (default), 3: note
-#
-
-# Warning is given if doing tab-to-\t replacement and we have found one in a C# verbatim string literal.
-warn_level_tabs_found_in_verbatim_string_literals = 2 # unsigned number
-
-# Meaning of the settings:
-# Ignore - do not do any changes
-# Add - makes sure there is 1 or more space/brace/newline/etc
-# Force - makes sure there is exactly 1 space/brace/newline/etc,
-# behaves like Add in some contexts
-# Remove - removes space/brace/newline/etc
-#
-#
-# - Token(s) can be treated as specific type(s) with the 'set' option:
-# `set tokenType tokenString [tokenString...]`
-#
-# Example:
-# `set BOOL __AND__ __OR__`
-#
-# tokenTypes are defined in src/token_enum.h, use them without the
-# 'CT_' prefix: 'CT_BOOL' -> 'BOOL'
-#
-#
-# - Token(s) can be treated as type(s) with the 'type' option.
-# `type tokenString [tokenString...]`
-#
-# Example:
-# `type int c_uint_8 Rectangle`
-#
-# This can also be achieved with `set TYPE int c_uint_8 Rectangle`
-#
-#
-# To embed whitespace in tokenStrings use the '\' escape character, or quote
-# the tokenStrings. These quotes are supported: "'`
-#
-#
-# - Support for the auto detection of languages through the file ending can be
-# added using the 'file_ext' command.
-# `file_ext langType langString [langString..]`
-#
-# Example:
-# `file_ext CPP .ch .cxx .cpp.in`
-#
-# langTypes are defined in uncrusify_types.h in the lang_flag_e enum, use
-# them without the 'LANG_' prefix: 'LANG_CPP' -> 'CPP'
-#
-#
-# - Custom macro-based indentation can be set up using 'macro-open',
-# 'macro-else' and 'macro-close'.
-# `(macro-open | macro-else | macro-close) tokenString`
-#
-# Example:
-# `macro-open BEGIN_TEMPLATE_MESSAGE_MAP`
-# `macro-open BEGIN_MESSAGE_MAP`
-# `macro-close END_MESSAGE_MAP`
-#
-set FOR BMO_ITER
-set FOR BM_ITER_ELEM
-set FOR BM_ITER_ELEM_INDEX
-set FOR BM_ITER_MESH
-set FOR BM_ITER_MESH_INDEX
-set FOR FOREACH_NODETREE
-set FOR GHASH_ITER
-set FOR GSET_ITER
-set FOR LOOP_DYNAMIC_PARTICLES
-set FOR LOOP_EXISTING_PARTICLES
-set FOR LOOP_PARTICLES
-set FOR LOOP_SHOWN_PARTICLES
-# option(s) with 'not default' value: 54
-#
diff --git a/utils/uncrustify_clean.sh b/utils/uncrustify_clean.sh
deleted file mode 100755
index 1a78560b8fe70950cfde9562a46b9b0733f2f136..0000000000000000000000000000000000000000
--- a/utils/uncrustify_clean.sh
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/bash
-
-CFG="source/tools/utils/uncrustify.cfg"
-
-if [ ! -f $CFG ]
-then
- echo "Run this from the blender source directory: " $CFG " not found, aborting"
- exit 0
-fi
-
-
-for fn in "$@"
-do
- # without this, the script simply undoes whitespace changes.
- uncrustify -c $CFG --no-backup --replace "$fn"
-
- cp "$fn" "$fn.NEW"
- git checkout "$fn" 1> /dev/null
-
- diff "$fn" "$fn.NEW" -u --ignore-trailing-space --ignore-blank-lines > "$fn.DIFF"
-
- patch "$fn" "$fn.DIFF" 1> /dev/null
-
- rm "$fn.NEW"
- rm "$fn.DIFF"
-done