3D-Print: Cleanup convert docstrings to bl_description

object_print3d_utils/operators.py

@@ -49,9 +49,9 @@ def clean_float(text):
 # Mesh Info
 
 class MESH_OT_print3d_info_volume(Operator):
-    """Report the volume of the active mesh"""
     bl_idname = "mesh.print3d_info_volume"
     bl_label = "3D-Print Info Volume"
+    bl_description = "Report the volume of the active mesh"
 
     def execute(self, context):
         scene = context.scene
@@ -78,9 +78,9 @@ class MESH_OT_print3d_info_volume(Operator):
 
 
 class MESH_OT_print3d_info_area(Operator):
-    """Report the surface area of the active mesh"""
     bl_idname = "mesh.print3d_info_area"
     bl_label = "3D-Print Info Area"
+    bl_description = "Report the surface area of the active mesh"
 
     def execute(self, context):
         scene = context.scene
@@ -127,9 +127,9 @@ def multiple_obj_warning(self, context):
 
 
 class MESH_OT_print3d_check_solid(Operator):
-    """Check for geometry is solid (has valid inside/outside) and correct normals"""
     bl_idname = "mesh.print3d_check_solid"
     bl_label = "3D-Print Check Solid"
+    bl_description = "Check for geometry is solid (has valid inside/outside) and correct normals"
 
     @staticmethod
     def main_check(obj, info):
@@ -153,9 +153,9 @@ class MESH_OT_print3d_check_solid(Operator):
 
 
 class MESH_OT_print3d_check_intersections(Operator):
-    """Check geometry for self intersections"""
     bl_idname = "mesh.print3d_check_intersect"
     bl_label = "3D-Print Check Intersections"
+    bl_description = "Check geometry for self intersections"
 
     @staticmethod
     def main_check(obj, info):
@@ -167,10 +167,12 @@ class MESH_OT_print3d_check_intersections(Operator):
 
 
 class MESH_OT_print3d_check_degenerate(Operator):
-    """Check for degenerate geometry that may not print properly """ \
-    """(zero area faces, zero length edges)"""
     bl_idname = "mesh.print3d_check_degenerate"
     bl_label = "3D-Print Check Degenerate"
+    bl_description = (
+        "Check for degenerate geometry that may not print properly "
+        "(zero area faces, zero length edges)"
+    )
 
     @staticmethod
     def main_check(obj, info):
@@ -195,9 +197,9 @@ class MESH_OT_print3d_check_degenerate(Operator):
 
 
 class MESH_OT_print3d_check_distorted(Operator):
-    """Check for non-flat faces """
     bl_idname = "mesh.print3d_check_distort"
     bl_label = "3D-Print Check Distorted Faces"
+    bl_description = "Check for non-flat faces "
 
     @staticmethod
     def main_check(obj, info):
@@ -224,10 +226,12 @@ class MESH_OT_print3d_check_distorted(Operator):
 
 
 class MESH_OT_print3d_check_thick(Operator):
-    """Check geometry is above the minimum thickness preference """ \
-    """(relies on correct normals)"""
     bl_idname = "mesh.print3d_check_thick"
     bl_label = "3D-Print Check Thickness"
+    bl_description = (
+        "Check geometry is above the minimum thickness preference "
+        "(relies on correct normals)"
+    )
 
     @staticmethod
     def main_check(obj, info):
@@ -242,9 +246,9 @@ class MESH_OT_print3d_check_thick(Operator):
 
 
 class MESH_OT_print3d_check_sharp(Operator):
-    """Check edges are below the sharpness preference"""
     bl_idname = "mesh.print3d_check_sharp"
     bl_label = "3D-Print Check Sharp"
+    bl_description = "Check edges are below the sharpness preference"
 
     @staticmethod
     def main_check(obj, info):
@@ -268,9 +272,9 @@ class MESH_OT_print3d_check_sharp(Operator):
 
 
 class MESH_OT_print3d_check_overhang(Operator):
-    """Check faces don't overhang past a certain angle"""
     bl_idname = "mesh.print3d_check_overhang"
     bl_label = "3D-Print Check Overhang"
+    bl_description = "Check faces don't overhang past a certain angle"
 
     @staticmethod
     def main_check(obj, info):
@@ -305,9 +309,9 @@ class MESH_OT_print3d_check_overhang(Operator):
 
 
 class MESH_OT_print3d_check_all(Operator):
-    """Run all checks"""
     bl_idname = "mesh.print3d_check_all"
     bl_label = "3D-Print Check All"
+    bl_description = "Run all checks"
 
     check_cls = (
         MESH_OT_print3d_check_solid,
@@ -334,9 +338,9 @@ class MESH_OT_print3d_check_all(Operator):
 
 
 class MESH_OT_print3d_clean_isolated(Operator):
-    """Cleanup isolated vertices and edges"""
     bl_idname = "mesh.print3d_clean_isolated"
-    bl_label = "3D-Print Clean Isolated "
+    bl_label = "3D-Print Clean Isolated"
+    bl_description = "Cleanup isolated vertices and edges"
     bl_options = {'REGISTER', 'UNDO'}
 
     def execute(self, context):
@@ -396,9 +400,9 @@ class MESH_OT_print3d_clean_isolated(Operator):
 
 
 class MESH_OT_print3d_clean_distorted(Operator):
-    """Tessellate distorted faces"""
     bl_idname = "mesh.print3d_clean_distorted"
     bl_label = "3D-Print Clean Distorted"
+    bl_description = "Tessellate distorted faces"
     bl_options = {'REGISTER', 'UNDO'}
 
     def execute(self, context):
@@ -422,9 +426,9 @@ class MESH_OT_print3d_clean_distorted(Operator):
 
 
 class MESH_OT_print3d_clean_non_manifold(Operator):
-    """Cleanup problems, like holes, non-manifold vertices, and inverted normals"""
     bl_idname = "mesh.print3d_clean_non_manifold"
     bl_label = "3D-Print Clean Non-Manifold and Inverted"
+    bl_description = "Cleanup problems, like holes, non-manifold vertices, and inverted normals"
     bl_options = {'REGISTER', 'UNDO'}
 
     threshold: bpy.props.FloatProperty(
@@ -550,7 +554,7 @@ class MESH_OT_print3d_clean_non_manifold(Operator):
 
     @classmethod
     def fill_non_manifold(cls, sides):
-        """fill holes and then fill in any remnant non-manifolds"""
+        """fill in any remnant non-manifolds"""
         bpy.ops.mesh.select_all(action='SELECT')
         bpy.ops.mesh.fill_holes(sides=sides)
 
@@ -562,9 +566,9 @@ class MESH_OT_print3d_clean_non_manifold(Operator):
 
 
 class MESH_OT_print3d_clean_thin(Operator):
-    """Ensure minimum thickness"""
     bl_idname = "mesh.print3d_clean_thin"
     bl_label = "3D-Print Clean Thin"
+    bl_description = "Ensure minimum thickness"
     bl_options = {'REGISTER', 'UNDO'}
 
     def execute(self, context):
@@ -578,9 +582,9 @@ class MESH_OT_print3d_clean_thin(Operator):
 # ... helper function for info UI
 
 class MESH_OT_print3d_select_report(Operator):
-    """Select the data associated with this report"""
     bl_idname = "mesh.print3d_select_report"
     bl_label = "3D-Print Select Report"
+    bl_description = "Select the data associated with this report"
     bl_options = {'INTERNAL'}
 
     index: IntProperty()
@@ -632,9 +636,9 @@ def _scale(scale, report=None, report_suffix=""):
 
 
 class MESH_OT_print3d_scale_to_volume(Operator):
-    """Scale edit-mesh or selected-objects to a set volume"""
     bl_idname = "mesh.print3d_scale_to_volume"
     bl_label = "Scale to Volume"
+    bl_description = "Scale edit-mesh or selected-objects to a set volume"
     bl_options = {'REGISTER', 'UNDO'}
 
     volume_init: FloatProperty(
@@ -679,9 +683,9 @@ class MESH_OT_print3d_scale_to_volume(Operator):
 
 
 class MESH_OT_print3d_scale_to_bounds(Operator):
-    """Scale edit-mesh or selected-objects to fit within a maximum length"""
     bl_idname = "mesh.print3d_scale_to_bounds"
     bl_label = "Scale to Bounds"
+    bl_description = "Scale edit-mesh or selected-objects to fit within a maximum length"
     bl_options = {'REGISTER', 'UNDO'}
 
     length_init: FloatProperty(
@@ -737,9 +741,9 @@ class MESH_OT_print3d_scale_to_bounds(Operator):
 # Export
 
 class MESH_OT_print3d_export(Operator):
-    """Export active object using print3d settings"""
     bl_idname = "mesh.print3d_export"
     bl_label = "3D-Print Export"
+    bl_description = "Export active object using 3D-Print settings"
 
     def execute(self, context):
         from . import export