mic_environment.md

# Intel Xeon Phi Environment

Intel Xeon Phi accelerator can be programmed in several modes. The default mode on the cluster is offload mode, but all modes described in this document are supported.

!!! warning
    Only Salomon cluster.

## Intel Utilities for Xeon Phi

To get access to a compute node with Intel Xeon Phi accelerator, use the PBS interactive session

```console
$ qsub -I -q qprod -l select=1:ncpus=24:accelerator=True -A NONE-0-0
```

To set up the environment module `intel` has to be loaded, without specifying the version, default version is loadedi

```console
$ ml intel/2017b
```

Information about the hardware can be obtained by running the micinfo program on the host.

```console
$ /usr/bin/micinfo
```

The output of the `micinfo` utility executed on one of the cluster node is as follows. (note: to get PCIe related details the command has to be run with root privileges)

```console
MicInfo Utility Log
Created Thu Dec  7 09:19:43 2017


   System Info
      HOST OS       : Linux
      OS Version         : 2.6.32-696.10.3.el6.x86_64
      Driver Version     : 3.8.2-1
      MPSS Version       : 3.8.2
      Host Physical Memory    : 128838 MB

Device No: 0, Device Name: mic0

   Version
      Flash Version       : 2.1.02.0391
      SMC Firmware Version     : 1.17.6900
...
```

## Offload Mode

To compile a code for Intel Xeon Phi a MPSS stack has to be installed on the machine where compilation is executed. Currently the MPSS stack is only installed on compute nodes equipped with accelerators.

```console
$ qsub -I -q qprod -l select=1:ncpus=24:accelerator=True -A NONE-0-0
```

A very basic example of code that employs offload programming technique is shown in the next listing. Please note that this code is sequential and utilizes only single core of the accelerator.

```cpp
#include <iostream>

int main(int argc, char* argv[])
{
    const int niter = 100000;
    double result = 0;

 #pragma offload target(mic)
    for (int i = 0; i < niter; ++i) {
   const double t = (i + 0.5) / niter;
   result += 4.0 / (t * t + 1.0);
    }
    result /= niter;
    std::cout << "Pi ~ " << result << '\n';
}
```

### Intel

To compile a code using Intel compiler run following commands

* Create `source-offload.cpp`

```console
$ vim source-offload.cpp
```

```cpp
#include <iostream>

int main(int argc, char* argv[])
{
    const int niter = 100000;
    double result = 0;

 #pragma offload target(mic)
    for (int i = 0; i < niter; ++i) {
   const double t = (i + 0.5) / niter;
   result += 4.0 / (t * t + 1.0);
    }
    result /= niter;
    std::cout << "Pi ~ " << result << '\n';
}
```

* Compile

```console
$ ml intel/2017b
$ icc source-offload.cpp -o bin-offload
```

* To execute the code, run the following command on the host

```console
$ ./bin-offload
Pi ~ 3.14159
```

### GCC With [KNC](https://en.wikipedia.org/wiki/Xeon_Phi) Support

On Salomon cluster we have module `GCC/5.1.1-knc` with cross-compiled support. (gcc, g++ and gfortran)

To compile a code using GCC compiler run following commands

* Create `reduce_mul.c`

```console
$ vim reduce_mul.c
```

```c
#include <immintrin.h>

double reduce(double* values)
{
   __m512d val = _mm512_load_pd(values);
   return _mm512_reduce_mul_pd(val);
}
```

* A create `main.c`

```console
vim main.c
```

```c
#include <immintrin.h>
#include <stdio.h>
#include <stdlib.h>

double reduce(double* values);

int main(int argc, char* argv[])
{
   // Generate random input vector of [-1, 1] values.
   double values[8] __attribute__((aligned(64)));
   for (int i = 0; i < 8; i++)
      values[i] = 2 * (0.5 - rand() / (double)RAND_MAX);

   double vector = reduce(values);
   double scalar = values[0];
   for (int i = 1; i < 8; i++)
      scalar *= values[i];

   printf("%f vs %f\n", vector, scalar);

   fflush(stdout);

   return 0;
}
```

* Compile

```console
$ ml GCC/5.1.1-knc
$ gcc -mavx512f -O3 -c reduce_mul.c -o reduce_mul.s -S
$ gcc -O3 -c reduce_mul.s -o reduce_mul.o
$ gcc -std=c99 -O3 -c main.c -o main_gcc.o
$ gcc -O3 reduce_mul.o main_gcc.o -o reduce_mul
```

* To execute the code, run the following command on the host

```console
$ micnativeloadex ./reduce_mul
-0.004276 vs -0.004276
```

## Native Mode

In the native mode a program is executed directly on Intel Xeon Phi without involvement of the host machine. Similarly to offload mode, the code is compiled on the host computer with Intel compilers.

To compile a code user has to be connected to a compute with MIC and load Intel compilers module. To get an interactive session on a compute node with an Intel Xeon Phi and load the module use following commands

```console
$ qsub -I -q qprod -l select=1:ncpus=24:accelerator=True -A NONE-0-0
$ ml intel/2017b
```

To produce a binary compatible with Intel Xeon Phi architecture user has to specify `-mmic` compiler flag. Two compilation examples are shown below. The first example shows how to compile OpenMP parallel code `vect-add.c` for host only

```c
#include <stdio.h>

typedef int T;

#define SIZE 1000

#pragma offload_attribute(push, target(mic))
T in1[SIZE];
T in2[SIZE];
T res[SIZE];
#pragma offload_attribute(pop)

// MIC function to add two vectors
__attribute__((target(mic))) add_mic(T *a, T *b, T *c, int size) {
  int i = 0;
  #pragma omp parallel for
    for (i = 0; i < size; i++)
      c[i] = a[i] + b[i];
}

// CPU function to add two vectors
void add_cpu (T *a, T *b, T *c, int size) {
  int i;
  for (i = 0; i < size; i++)
    c[i] = a[i] + b[i];
}

// CPU function to generate a vector of random numbers
void random_T (T *a, int size) {
  int i;
  for (i = 0; i < size; i++)
    a[i] = rand() % 10000; // random number between 0 and 9999
}

// CPU function to compare two vectors
int compare(T *a, T *b, T size ){
  int pass = 0;
  int i;
  for (i = 0; i < size; i++){
    if (a[i] != b[i]) {
      printf("Value mismatch at location %d, values %d and %dn",i, a[i], b[i]);
      pass = 1;
    }
  }
  if (pass == 0) printf ("Test passedn"); else printf ("Test Failedn");
  return pass;
}

int main()
{
  int i;
  random_T(in1, SIZE);
  random_T(in2, SIZE);

  #pragma offload target(mic) in(in1,in2)  inout(res)
  {

    // Parallel loop from main function
    #pragma omp parallel for
    for (i=0; i<SIZE; i++)
      res[i] = in1[i] + in2[i];

    // or parallel loop is called inside the function
    add_mic(in1, in2, res, SIZE);

  }

  //Check the results with CPU implementation
  T res_cpu[SIZE];
  add_cpu(in1, in2, res_cpu, SIZE);
  compare(res, res_cpu, SIZE);

}
```

```console
$ icc -xhost -no-offload -fopenmp vect-add.c -o vect-add-host
```

* To run this code on host, use

```console
$ ./vect-add-host
Test passed
```

* The second example shows how to compile the same code for Intel Xeon Phi

```console
$ icc -mmic -fopenmp vect-add.c -o vect-add-mic
```

* Execution of the Program in Native Mode on Intel Xeon Phi

The user access to the Intel Xeon Phi is through the SSH. Since user home directories are mounted using NFS on the accelerator, users do not have to copy binary files or libraries between the host and accelerator. Get the PATH of MIC enabled libraries for currently used Intel Compiler.

* To run this code on Intel Xeon Phi

```console
$ ssh mic0
$ ./vect-add-mic
./vect-add-mic: error while loading shared libraries: libiomp5.so: cannot open shared object file: No such file or directory
$ export LD_LIBRARY_PATH=LD_LIBRARY_PATH:/apps/all/icc/2017.4.196-GCC-6.4.0-2.28/compilers_and_libraries/linux/lib/mic
$ ./vect-add-mic
Test passed
```

!!! tip
    Or use the procedure from the chapter Devel Environment.

## Only Intel Xeon Phi Cards

Execute native job

```console
$ qsub -A NONE-0-0 -q qmic -l select=1 -l walltime=10:00:00 -I
r21u01n577-mic1:~$
```

## Devel Environment

To get an overview of the currently loaded modules, use `module list` or `ml` (without specifying extra arguments).

```console
r21u02n578-mic0:~$ ml
No modules loaded
```

To get an overview of all available modules, you can use `ml avail` or simply `ml av`

```console
r21u02n578-mic0:~$ ml av

-------------- /apps/phi/system/devel --------------------------
   devel_environment/1.0 (S)

  Where:
   S:  Module is Sticky, requires --force to unload or purge

```

Activate devel environment

```console
r21u02n578-mic0:~$ ml devel_environment
```

And again to get an overview of all available modules, you can use `ml avail` or simply `ml av`

```console
r21u02n578-mic0:~$ ml av

-------------- /apps/phi/modules/compiler --------------------------
   icc/2017.4.196-GCC-6.4.0-2.28

-------------- /apps/phi/modules/devel --------------------------
   M4/1.4.18    devel_environment/1.0 (S)    ncurses/6.0

-------------- /apps/phi/modules/lang --------------------------
   Bison/3.0.4    Tcl/8.6.6    flex/2.6.4

-------------- /apps/phi/modules/lib --------------------------
   libreadline/7.0    zlib/1.2.11

-------------- /apps/phi/modules/math --------------------------
   Octave/3.8.2

-------------- /apps/phi/modules/mpi --------------------------
   impi/2017.3.196-iccifort-2017.4.196-GCC-6.4.0-2.28

-------------- /apps/phi/modules/toolchain --------------------------
   iccifort/2017.4.196-GCC-6.4.0-2.28    ifort/2017.4.196-GCC-6.4.0-2.28

-------------- /apps/phi/modules/tools --------------------------
   bzip2/1.0.6    cURL/7.53.1    expat/2.2.5

-------------- /apps/phi/modules/vis --------------------------
   gettext/0.19.8

  Where:
   S:  Module is Sticky, requires --force to unload or purge

```

After load module `devel_environment` are available modules for architecture k1om-mpss-linux and now exists systems software (gcc, cmake, make, git, htop, vim, ...).

* Example

```console
r21u02n578-mic0:~$ gcc --version
gcc (GCC) 5.1.1
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

@r21u02n578-mic0:~$ cmake --version
cmake version 2.8.7

r21u02n578-mic0:~$ git --version
git version 1.7.7

r21u02n578-mic0:~$ make --version
GNU Make 3.82
Built for k1om-mpss-linux-gnu
Copyright (C) 2010  Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

r21u02n578-mic0:~$ perl --version

This is perl 5, version 14, subversion 2 (v5.14.2) built for k1om-linux

Copyright 1987-2011, Larry Wall

Perl may be copied only under the terms of either the Artistic License or the
GNU General Public License, which may be found in the Perl 5 source kit.

Complete documentation for Perl, including FAQ lists, should be found on
this system using "man perl" or "perldoc perl".  If you have access to the
Internet, point your browser at http://www.perl.org/, the Perl Home Page.

...
```

* Execute previous cross-compiled code `vect-add-mic`

```console
r21u01n577-mic1:~$ ml devel_environment
r21u01n577-mic1:~$ ml icc
r21u01n577-mic1:~$ ./vect-add-mic
Test passed
```

!!! tip
    PATH of MIC libraries for Intel Compiler set automatically.

## Modules

Examples for modules.

### MPI

Load module for devel environment `devel_environment` and load mpi module `impi/2017.3.196-iccifort-2017.4.196-GCC-6.4.0-2.28` (intel/2017b)

Execute test

```console
$ qsub -A SERVICE -q qmic -l select=4 -l walltime=01:00:00 -I
r21u01n577-mic0:~$ ml devel_environment
r21u01n577-mic0:~$ ml impi
r21u01n577-mic0:~$ ml

Currently Loaded Modules:
  1) devel_environment/1.0    (S)   3) ifort/2017.4.196-GCC-6.4.0-2.28      5) impi/2017.3.196-iccifort-2017.4.196-GCC-6.4.0-2.28
  2) icc/2017.4.196-GCC-6.4.0-2.28       4) iccifort/2017.4.196-GCC-6.4.0-2.28

  Where:
   S:  Module is Sticky, requires --force to unload or purge
r21u01n577-mic0:~$ mpirun -n 244 hostname | sort | uniq -c | sort -n
     61 r21u01n577-mic0
     61 r21u01n577-mic1
     61 r21u02n578-mic0
     61 r21u02n578-mic1
r21u01n577-mic0:~$ mpirun -n 976 hostname | sort | uniq -c | sort -n
    244 r21u01n577-mic0
    244 r21u01n577-mic1
    244 r21u02n578-mic0
    244 r21u02n578-mic1
r21u01n577-mic0:~$ mpirun hostname | sort | uniq -c | sort -n
      1 r21u01n577-mic0
      1 r21u01n577-mic1
      1 r21u02n578-mic0
      1 r21u02n578-mic1
```

!!! warning
    Modules icc, ifort and iccifort are only libraries and headers, not compilers... For compile use the procedure from the chapter Native Mode

### Octave/3.8.2

Load module for devel environment `devel_environment`, load module `Octave/3.8.2` and run test

```console
r21u01n577-mic0:~$ ml devel_environment
r21u01n577-mic0:~$ ml Octave/3.8.2
r21u01n577-mic0:~$ octave -q /apps/phi/software/Octave/3.8.2/example/test0.m
warning: docstring file '/apps/phi/software/Octave/3.8.2/share/octave/3.8.2/etc/built-in-docstrings' not found
warning: readline is not linked, so history control is not available
Use some basic operators ...
Work with some small matrixes ...
Save matrix to file ...
Load matrix from file ...
Display matrix ...
m3 =

    39.200    19.600    39.200
    58.800   117.600   156.800
   254.800   411.600   686.000

Work with some big matrixes ...
Sum ...
Multiplication ...
r21u01n577-mic0:~$ cat test.mat
# Created by Octave 3.8.2, Thu Dec 07 11:11:09 2017 CET <kru0052@r21u01n577-mic0>
# name: m3
# type: matrix
# rows: 3
# columns: 3
 39.2 19.6 39.2
 58.8 117.6 156.8
 254.8 411.6 686
```

## Native Build Software With Devel Environment

**Compiler**

* gcc (GCC) 5.1.1 **without** gfortran support

**Architecture** (depends on compiled software):

* k1om-unknown-linux-gnu
* k1om-mpss-linux-gnu
* x86_64-k1om-linux
* k1om-mpss-linux

**Configure step** (for `configure`,`make` and `make install` software)

* specify architecture `--build=`

```console
./configure --prefix=/apps/phi/software/ncurses/6.0 --build=k1om-mpss-linux
```

**Modulefile and Lmod**

* Read [Lmod](../modules/lmod/)